X470 Ram OC

Pages (2): 1 2 Next

EricBernardo
Junior Member

07-27-2019, 06:32 AM

Hey there! I upgraded from a 2700 to a 3700x and kept the Asus X470 Prime motherboard. Before installing the new chipset, I managed to reach 3200MHz at 1.35V with my RAM. With the 3700x I can only get 3000MHz under the same conditions. Do you have any advice or suggestions? Appreciate it!

EricBernardo

07-27-2019, 06:32 AM #1

Kevin0161003
Member

179

07-27-2019, 06:45 AM

Current BIOS and chipset drivers available.

Kevin0161003

07-27-2019, 06:45 AM #2

Current BIOS and chipset drivers available.

kensteele
Member

114

07-27-2019, 01:57 PM

The most recent version came out four days back with a minor update, but you're still experiencing issues.

kensteele

07-27-2019, 01:57 PM #3

The most recent version came out four days back with a minor update, but you're still experiencing issues.

Skulhead2a
Member

210

07-28-2019, 09:11 AM

Maybe simplify the CMOS? It's conceivable the old memory training info is still locked in the BIOS.

Skulhead2a

07-28-2019, 09:11 AM #4

Maybe simplify the CMOS? It's conceivable the old memory training info is still locked in the BIOS.

Snipertje11
Junior Member

08-14-2019, 10:25 AM

I've already resolved the issue after installing the new CPU, and I even tested 1.4v without success.

Snipertje11

08-14-2019, 10:25 AM #5

I've already resolved the issue after installing the new CPU, and I even tested 1.4v without success.

AsherDanTDM
Member

08-16-2019, 05:47 AM

Reset the CMOS and verify the results. Experiment with the SOC voltage, adjusting it to 1.1 and confirming the changes.

AsherDanTDM

08-16-2019, 05:47 AM #6

Reset the CMOS and verify the results. Experiment with the SOC voltage, adjusting it to 1.1 and confirming the changes.

bigcow666
Member

08-22-2019, 05:43 AM

Attempt the action. Check if any additional steps are required or simply adjust to 1.1v.

bigcow666

08-22-2019, 05:43 AM #7

Attempt the action. Check if any additional steps are required or simply adjust to 1.1v.

OMGitzbrent
Member

155

08-22-2019, 07:14 AM

Adjusted to 1.1 and tested.

OMGitzbrent

08-22-2019, 07:14 AM #8

Adjusted to 1.1 and tested.

Gladiador70
Senior Member

698

08-24-2019, 08:01 AM

It seems the device was running at 1.1v but didn’t respond. Try adjusting it manually and see if that helps.

Gladiador70

08-24-2019, 08:01 AM #9

It seems the device was running at 1.1v but didn’t respond. Try adjusting it manually and see if that helps.

DJFlojo231
Junior Member

09-04-2019, 07:56 PM

#10

Ja, die D.O.C.P. ist aktiviert.

DJFlojo231

09-04-2019, 07:56 PM #10

Ja, die D.O.C.P. ist aktiviert.

Pages (2): 1 2 Next