F5F Stay Refreshed Hardware Desktop Working at a reduced pace compared to usual.

Working at a reduced pace compared to usual.

Working at a reduced pace compared to usual.

E
Emily12341
Member
65
08-26-2021, 11:53 AM
#1
I've been using Wd blue 2 tb nvme ssd for some time, but it's getting quite full. I added a 1tb sata ssd to improve performance and moved old video files I no longer use. Since the new ssd is in my PC, it's running slower now. Opening Chrome takes a few seconds, Premiere Pro sometimes crashes during startup due to boot time, and scrolling through video file properties on NVMe Explorer often freezes. After upgrading to the new SSD, system specs show Intel i5 12600k with 16gb and 32gb options, Corsair Vengeance, Windows 11, Wd Blue Sn570, and PnP CS900 (269gb free of 931). Only unused footage files remain.
E
Emily12341
08-26-2021, 11:53 AM #1

I've been using Wd blue 2 tb nvme ssd for some time, but it's getting quite full. I added a 1tb sata ssd to improve performance and moved old video files I no longer use. Since the new ssd is in my PC, it's running slower now. Opening Chrome takes a few seconds, Premiere Pro sometimes crashes during startup due to boot time, and scrolling through video file properties on NVMe Explorer often freezes. After upgrading to the new SSD, system specs show Intel i5 12600k with 16gb and 32gb options, Corsair Vengeance, Windows 11, Wd Blue Sn570, and PnP CS900 (269gb free of 931). Only unused footage files remain.

J
Jadakes
Junior Member
15
08-26-2021, 12:55 PM
#2
Execute CrystalDiskMark to observe its performance metrics. Then proceed with further testing. For example, disconnect the PNY SATA cable from the motherboard and check if system speed improves.
J
Jadakes
08-26-2021, 12:55 PM #2

Execute CrystalDiskMark to observe its performance metrics. Then proceed with further testing. For example, disconnect the PNY SATA cable from the motherboard and check if system speed improves.

A
AgentSkywalker
Member
65
08-30-2021, 10:56 AM
#3
I removed the SATA SSD and the problem persisted.
A
AgentSkywalker
08-30-2021, 10:56 AM #3

I removed the SATA SSD and the problem persisted.

N
Nessa106
Member
169
09-13-2021, 12:34 PM
#4
this is the disk benchmark result
N
Nessa106
09-13-2021, 12:34 PM #4

this is the disk benchmark result

M
MissyPlayzz
Member
76
09-13-2021, 01:31 PM
#5
These numbers match what you'd anticipate for gen3. The performance of the drive remains satisfactory there. There seems to be another problem elsewhere affecting this.
M
MissyPlayzz
09-13-2021, 01:31 PM #5

These numbers match what you'd anticipate for gen3. The performance of the drive remains satisfactory there. There seems to be another problem elsewhere affecting this.

_
__TicciToby__
Junior Member
46
09-13-2021, 02:11 PM
#6
I’m fine with a slower process, but I’m curious what could lead to File Explorer crashing when opening certain files.
_
__TicciToby__
09-13-2021, 02:11 PM #6

I’m fine with a slower process, but I’m curious what could lead to File Explorer crashing when opening certain files.

X
xXMin3rCraftXx
Member
71
09-13-2021, 10:10 PM
#7
The problem seems to be elsewhere. Likely the RAM is the cause. Your performance is very high, so the SSD appears to be working properly.
X
xXMin3rCraftXx
09-13-2021, 10:10 PM #7

The problem seems to be elsewhere. Likely the RAM is the cause. Your performance is very high, so the SSD appears to be working properly.

C
Chester09
Senior Member
491
09-15-2021, 08:42 PM
#8
I'll try a different configuration of RAM to check if it's the problem
C
Chester09
09-15-2021, 08:42 PM #8

I'll try a different configuration of RAM to check if it's the problem