F5F Stay Refreshed Hardware Desktop Windows won't start when DOCP is turned on.

Windows won't start when DOCP is turned on.

Windows won't start when DOCP is turned on.

B
BleuDynamyte
Junior Member
3
08-16-2022, 08:56 AM
#1
Hey, I see the issue. Your PC keeps trying to boot three times before finally getting to the BIOS, even though you had a single stick of RAM working. When you added another stick, it stopped working. You also tried changing the RAM manually, but nothing changed. It might be related to the second stick not being properly seated or recognized by the system. Check the RAM connections and ensure both sticks are compatible with your motherboard. If the problem persists, there could be a faulty RAM module or a hardware issue.
B
BleuDynamyte
08-16-2022, 08:56 AM #1

Hey, I see the issue. Your PC keeps trying to boot three times before finally getting to the BIOS, even though you had a single stick of RAM working. When you added another stick, it stopped working. You also tried changing the RAM manually, but nothing changed. It might be related to the second stick not being properly seated or recognized by the system. Check the RAM connections and ensure both sticks are compatible with your motherboard. If the problem persists, there could be a faulty RAM module or a hardware issue.

F
Fretti0_YTB
Member
196
08-16-2022, 11:04 AM
#2
Are the two sticks identical in brand or part number? Yes, but makers may vary memory chips within the same part number, though revisions change.
F
Fretti0_YTB
08-16-2022, 11:04 AM #2

Are the two sticks identical in brand or part number? Yes, but makers may vary memory chips within the same part number, though revisions change.

D
Doctor_Pi
Member
214
08-19-2022, 12:11 AM
#3
Your profile information is fully current and accurate.
D
Doctor_Pi
08-19-2022, 12:11 AM #3

Your profile information is fully current and accurate.

S
StreetHobo
Senior Member
568
08-25-2022, 03:09 PM
#4
Raise DRAM voltage to 1.35 (maximum 1.4V) and slightly boost SoC voltage (keep under 1.2).
S
StreetHobo
08-25-2022, 03:09 PM #4

Raise DRAM voltage to 1.35 (maximum 1.4V) and slightly boost SoC voltage (keep under 1.2).

I
IPuckFenguins
Senior Member
380
08-25-2022, 11:58 PM
#5
No, it wouldn't be visible directly on the memory itself.
I
IPuckFenguins
08-25-2022, 11:58 PM #5

No, it wouldn't be visible directly on the memory itself.

S
salman_2003
Junior Member
7
08-29-2022, 06:02 AM
#6
Adjusting the voltages has no effect and remains consistent across all levels.
S
salman_2003
08-29-2022, 06:02 AM #6

Adjusting the voltages has no effect and remains consistent across all levels.

E
EthRry
Member
64
08-29-2022, 07:50 AM
#7
I just made changes to the bios a week back, but it hasn't fixed the issue yet.
E
EthRry
08-29-2022, 07:50 AM #7

I just made changes to the bios a week back, but it hasn't fixed the issue yet.

F
flameslinger36
Junior Member
3
08-29-2022, 01:39 PM
#8
The revision code is typically found on a small label attached to the RAM module. However, it isn't always reliable since some makers don't share this detail openly.
F
flameslinger36
08-29-2022, 01:39 PM #8

The revision code is typically found on a small label attached to the RAM module. However, it isn't always reliable since some makers don't share this detail openly.

N
NEVER2DOPE
Junior Member
14
09-06-2022, 08:49 PM
#9
I'll take a look when I get back from work.
N
NEVER2DOPE
09-06-2022, 08:49 PM #9

I'll take a look when I get back from work.

T
Tototach
Junior Member
23
09-08-2022, 09:24 AM
#10
If the sticker doesn't have any info regarding a part number difference or revision number difference, and if the sticks don't have aluminum heat-spreaders on them, you can always compare the information on the ram chips themselves.
T
Tototach
09-08-2022, 09:24 AM #10

If the sticker doesn't have any info regarding a part number difference or revision number difference, and if the sticks don't have aluminum heat-spreaders on them, you can always compare the information on the ram chips themselves.