F5F Stay Refreshed Hardware Desktop Windows 11 PC struggles to link with other devices on the same network.

Windows 11 PC struggles to link with other devices on the same network.

Windows 11 PC struggles to link with other devices on the same network.

Pages (3): 1 2 3 Next
S
Sheylizs
Member
81
05-26-2021, 10:35 PM
#1
I upgraded my Prusa Mini for Wi-Fi and am attempting to log in from my PC. Typing the IP address causes a timeout and no connection. This happened before when trying to remotely into an old phone via SSH for Octo4A's installation. It seems the problem isn't limited to the printer and works with my Android phone as well. The private connection setting is in place, but what else might be causing this issue?
S
Sheylizs
05-26-2021, 10:35 PM #1

I upgraded my Prusa Mini for Wi-Fi and am attempting to log in from my PC. Typing the IP address causes a timeout and no connection. This happened before when trying to remotely into an old phone via SSH for Octo4A's installation. It seems the problem isn't limited to the printer and works with my Android phone as well. The private connection setting is in place, but what else might be causing this issue?

I
imTri
Posting Freak
786
06-13-2021, 07:34 PM
#2
Yes, I can communicate with those devices.
I
imTri
06-13-2021, 07:34 PM #2

Yes, I can communicate with those devices.

W
Windows11
Junior Member
17
06-14-2021, 09:00 PM
#3
Also the timeout occurs
W
Windows11
06-14-2021, 09:00 PM #3

Also the timeout occurs

L
Luxray68
Junior Member
42
06-15-2021, 03:27 AM
#4
No, the networking Workgroup is not the same.
L
Luxray68
06-15-2021, 03:27 AM #4

No, the networking Workgroup is not the same.

W
WolfEH117
Member
180
06-15-2021, 03:35 AM
#5
My network setup is organized for efficient communication.
W
WolfEH117
06-15-2021, 03:35 AM #5

My network setup is organized for efficient communication.

R
ripa5000
Posting Freak
884
06-16-2021, 02:02 AM
#6
A typical residential environment. My computer links straight to the router/modem using a direct connection, while the Prusa is connected through Wi-Fi.
R
ripa5000
06-16-2021, 02:02 AM #6

A typical residential environment. My computer links straight to the router/modem using a direct connection, while the Prusa is connected through Wi-Fi.

T
tazman56
Member
222
06-16-2021, 10:06 AM
#7
The system is configured to the standard "WORKGROUP" setting for the Prusa printer, with no specific model details provided.
T
tazman56
06-16-2021, 10:06 AM #7

The system is configured to the standard "WORKGROUP" setting for the Prusa printer, with no specific model details provided.

V
viperboi123
Member
53
06-23-2021, 09:05 PM
#8
Do you have the IP addresses for these gadgets? Are you sure your computer is linked to a network segment labeled DMZ? Check if your system uses automatic IP assignment via DHCP or if you've manually assigned fixed addresses.
V
viperboi123
06-23-2021, 09:05 PM #8

Do you have the IP addresses for these gadgets? Are you sure your computer is linked to a network segment labeled DMZ? Check if your system uses automatic IP assignment via DHCP or if you've manually assigned fixed addresses.

G
GimpyTimmy99
Member
51
06-23-2021, 10:56 PM
#9
I receive the IP address through the system's configuration and network settings.
G
GimpyTimmy99
06-23-2021, 10:56 PM #9

I receive the IP address through the system's configuration and network settings.

D
DaniilKozhuhar
Member
143
06-24-2021, 03:53 AM
#10
All configurations are managed via DHCP. The printer is set to 192.168.1.15 while my PC is .0.2. None of the ports should be labeled like this because our local ISP recently restricted users from modifying their router settings—you’ll need to contact them for changes. I’m able to reach the printer from another Windows 10 machine on the same network that belongs to someone else, as well as my mobile device.
D
DaniilKozhuhar
06-24-2021, 03:53 AM #10

All configurations are managed via DHCP. The printer is set to 192.168.1.15 while my PC is .0.2. None of the ports should be labeled like this because our local ISP recently restricted users from modifying their router settings—you’ll need to contact them for changes. I’m able to reach the printer from another Windows 10 machine on the same network that belongs to someone else, as well as my mobile device.

Pages (3): 1 2 3 Next