F5F Stay Refreshed Hardware Desktop Windows 11 ensures secure boot functionality for system integrity.

Windows 11 ensures secure boot functionality for system integrity.

Windows 11 ensures secure boot functionality for system integrity.

K
Keuh20
Member
54
05-24-2021, 09:56 AM
#1
I'm working on making your PC Windows 11 compatible. The PC health check indicates Secure Boot support is required. Your system uses an ASUS TUF X570 plus with Wi-Fi, and the boot drive is set to GPT. You mentioned needing to disable CSM in BIOS, but you're having trouble because it won't boot to Windows and gets stuck in BIOS until you power it back on.
K
Keuh20
05-24-2021, 09:56 AM #1

I'm working on making your PC Windows 11 compatible. The PC health check indicates Secure Boot support is required. Your system uses an ASUS TUF X570 plus with Wi-Fi, and the boot drive is set to GPT. You mentioned needing to disable CSM in BIOS, but you're having trouble because it won't boot to Windows and gets stuck in BIOS until you power it back on.

L
LarsMatena
Senior Member
602
06-03-2021, 09:16 PM
#2
Start with mbr2gpt, then disable csm and activate secure boot.
L
LarsMatena
06-03-2021, 09:16 PM #2

Start with mbr2gpt, then disable csm and activate secure boot.

J
Jay_Senpai
Junior Member
6
06-14-2021, 01:14 PM
#3
J
Jay_Senpai
06-14-2021, 01:14 PM #3

G
195
06-14-2021, 02:18 PM
#4
If GPT exists, a (100MB) EFI boot partition should be present. Without it, the drive won't boot in EFI mode (CSM disabled). You can set up a new EFI partition. To do this, boot into Windows installation media and open the CMD prompt (Shift + F10) to run DiskPart. This guide outlines the process for creating a fresh EFI partition. https://www.tenforums.com/installation-u...post698505 For simplicity, ensure only your Windows drive is connected. Otherwise, use DiskPart to list disks and adjust commands to point to the right drive.
G
GetShrekedN00B
06-14-2021, 02:18 PM #4

If GPT exists, a (100MB) EFI boot partition should be present. Without it, the drive won't boot in EFI mode (CSM disabled). You can set up a new EFI partition. To do this, boot into Windows installation media and open the CMD prompt (Shift + F10) to run DiskPart. This guide outlines the process for creating a fresh EFI partition. https://www.tenforums.com/installation-u...post698505 For simplicity, ensure only your Windows drive is connected. Otherwise, use DiskPart to list disks and adjust commands to point to the right drive.