Windows 10 stopped unexpectedly after trying to perform an update.
Windows 10 stopped unexpectedly after trying to perform an update.
I attempted to push my PC to 4.6ghz, but Windows 10 wouldn't load. The system froze on the splash screen with the loading circle spinning endlessly. Returning to my previous stable configuration of 4.4 also caused the same issue. I removed the CMOS battery, waited, reinstalled it, and received a reset BIOS message. The problem persists.
I would first verify that your memory functions correctly by performing a complete pass with Memtest86 at www.memtest86.com.
My assumption is that the recent changes led to some data loss, so I would try repairing the boot sequence or applying a system restore if you have a recent restore point (programs after the restore are removed, but files like photos remain).
I recommend checking the boot repair option first.
To obtain a Windows 10 installation disc for this setup (if unavailable), follow these steps:
a) Visit the official MS site for the W10 media creation tool (use another PC if needed)
b) Insert an 8GB+ USB drive
c) Download and execute the tool, ensuring it matches your Windows version.
Check if the vcore voltage is automatically adjusted or needs manual configuration. Return to the original settings and begin again.
vcore operates automatically once again. All systems return to normal after the CMOS reset.
If you've consistently used auto for vcore voltage, it isn't very reliable. The BIOS might overpower the CPU and spike voltage briefly, which could harm the CPU. Start with 1.3v and 3.5v, check stability using AIDA or prime95. Then move to 1.325, 4.0, increasing slowly while noting the results.
I would first verify that your memory functions correctly by performing a COMPLETE TEST using Memtest86 at www.memtest86.com.
My assumption is that the recent changes may have led to data loss, so I would try a BOOT REPAIR or consider using SYSTEM RESTORE if you have a recent restore point (programs installed after the restore are removed, though files like photos remain).
I would visit the Windows support page for repairing the master boot record: http://www.thewindowsclub.com/repair-mas...br-windows
I recommend starting with the boot repair first.
To obtain a W10 installation media if needed, follow these steps:
a) Visit the official MS site for the W10 media creation tool (for another PC as well).
b) Insert an 8GB+ USB drive.
c) Download and execute the tool, ensuring it matches your Windows version (such as W10 Home 64-bit or W10 Home/Pro regardless of label).
d) After completion (which could take over two hours on a slower connection), remove and reinsert the drive into your computer.
e) Restart and boot, possibly adjusting the BIOS boot order, then proceed with the repair instructions provided.
OTHER:
If this approach succeeds, you might also consider an "In-Place Upgrade," which involves:
a) launching "setup.exe" from the USB with W10 installed.
b) hiding data/apps during the process but selecting them afterward.
c) Be aware of any key prompts (unlikely here), and if present, skip them.
d) Allow the process to finish.
This method reinstalls many critical files, potentially resolving corruption issues. It may be worth trying unless your system has persistent problems you can't resolve. (I've used it multiple times, especially when my Start Menu would behave oddly during W10 installation in the first year.)
Another unusual solution I encountered is to disconnect all devices, attempt to restart, then reconnect everything and restart again.
This might be connected to USB functionality; you could try:
1) power off the PC
2) leave it unplugged for a minute
3) remove all USB peripherals
4) restart
5) power off again
6) reinsert mouse and keyboard (if needed)
7) restart
OTHER:
Usually an overclock doesn't cause such issues, but I suggest using a tool like Acronis True Image for this situation and other reasons (even if it's not corrupted software for your problem). This helps in case the main drive fails or you encounter a virus that can't be resolved.
There are manual versions available (I use the full one for weekly updates) for Western Digital HDDs (still functional with USB) and Seagate Disdwizard is the same program for Seagate drives. Create a manual backup of the C-drive at the second highest compression level, and keep a RESTORE CD/USB stick ready to restore the backup image.
After that, you can experiment with your overclock again, but it might be safer to stick with the 4.4GHz setting you previously used (and consider using XMP for memory).
adjust the vcore manually. Do you recall the vcore voltage for 4.4? This should revert to the default setting once the BIOS is restored to factory defaults. It's not harmful to verify, though it's likely already set to the standard value.