Windows 10 is blocking the installation process...
Windows 10 is blocking the installation process...
A few days back, my PC suddenly stopped working, Windows 10 became corrupted, and after using DISM and SFC without success, I decided to reinstall Windows via the media creation tool. The installation went smoothly until the "Getting ready" screen appeared, blocking boot. It stayed on that screen for about ten hours before restarting. I was really hopeful until I saw the error message: "The PC restarted unexpectedly, please restart the Windows installation." I changed my SSD thinking that was the issue, but it didn’t work. What else should I try? I experimented with secure boot on and off, with and without CSM, and tried various methods, but I’m still unsure what’s causing the problem.
My initial setup turned out to be a faulty CPU. After swapping all components, including several SSDs and hard drives, the only time Windows 10 installed properly was when I returned the CPU for a replacement. Once that was done, the issue was resolved. My advice is to approach repairs step by step and test each part thoroughly. Please verify your parts are still covered under warranty. Begin with the simpler components, such as drives, and progress gradually. The power supply unit, motherboard, or CPU might be the culprits. If parts aren’t under warranty, look for opportunities to obtain replacement components. This is where having functional old PSUs can be useful. If someone else has a similar CPU, consider borrowing it or purchasing replacement parts from Amazon. If the problem persists, return them for a refund before making a purchase. Also, check if any USB cable or dongle you received might be compromised—infected with a mod chip is possible, though uncommon.
Thanks! It seems the SSD change didn’t cause the problem. I have another PC that might be useful, but it’s in my parents’ house in another city. If I get access, I’ll check the thread and see what I can do. Also, I’m curious—do you think installing Linux on the same PC could have any significance?
I'm not entirely confident, but I remember situations where Windows would function temporarily after installation, only to encounter issues later. I didn't test Linux with a weak CPU, yet it worked smoothly when the CPU was strong. Perhaps the problem is sporadic, and Linux succeeded when conditions were ideal, while Windows struggled under different circumstances. Another possibility is that certain instructions in Windows might rely on parts of the CPU or board that Linux doesn't touch, causing installation failures. These are just speculations at most. Until we identify the faulty component, we can't be certain.
Thanks a lot! It’s helpful to know I’m not alone with this issue. I’ve faced the same situation before—installing Windows and it would work for a while, but then it would become corrupted. So I’ll update the thread when I get another PC. Your advice was really valuable!
Have you attempted to re-download Windows 11 and created a fresh installation media? Perhaps the issue lies with the USB drive or the image file.
Sure, I experimented with both operating systems and various USB drives.