WiFi issues
WiFi issues
I used a USB adapter to connect to the Wi-Fi since the motherboard didn’t have built-in one. The PC only recognized nearby Wi-Fi networks and lost internet access on other devices once connected to the router. I tried connecting other gadgets and laptops to test if the issue was with the router. When I linked my PC to a phone’s Wi-Fi, it also failed to connect. After updating the USB adapter driver, the problem persisted. Could you try updating something else on the motherboard or check if the OS needs an update? It might be an operating system issue.
The router you have is it dual band? I'm asking because dual band routers can handle mixed signals, like both 802.11b and G simultaneously. Single band routers can't do that. If it's single band and set up to automatically negotiate the signal, it might be switching to a channel that no other devices you own are using. We faced this issue with an old scale we had that was Wi-Fi enabled for weight tracking. When we connected it, all other devices lost service because it was on a different frequency.
Wireless B and G operate on the 2.4 GHz frequency, allowing any 2.4 GHz router to connect with both devices. The system selects the slowest available speed for all connected gadgets. Many modern routers can also block older equipment to prevent network slowdowns. Dual-band capability means it supports both 2.4 GHz and 5 GHz bands. 5 GHz offers higher speeds, while 2.4 GHz provides better coverage.
I misunderstood your statement about needing a dual band router for B and G to work together. That’s not accurate.