WiFi adapter performance is declining significantly.
WiFi adapter performance is declining significantly.
I recently purchased a tp-link wireless adapter and noticed the box lists 150Mbps. On my computer, the Wi-Fi speed appears around 72.2Mbps, which seems unusual given the close distance to the router. A quick speed test revealed a ping of 11, download speed of about 1.09 Mbps (sometimes 10-15Mbps), and upload speed near 10Mbps. This discrepancy might be normal for wireless adapters, but it raises concerns about performance. The router only has two Ethernet ports, which are occupied, making it hard to connect a wired device without issues. If you're using Australian NBN, there may be setup challenges. Consider checking the adapter's specifications or contacting the manufacturer for more details.
Why is the upload faster than the download? What rates are you getting? Also, when the device displays 72mbps, are you referring to actual connection speeds?
It's the last thing we need... please send it if possible. It's well-known in the unstable space.
You're checking if these numbers refer to your actual internet connection rather than your local network. If that's the case, what speed do you expect from your plan? Just because a device supports a certain rate doesn't guarantee it will reach it. If your package only covers 10d 10u, the device will be limited to that. With this in mind, would adding more Ethernet ports with a switch be beneficial for your setup?
You might also want to test your connection using a cable first if it's feasible.
A change would definitely help, but I'm not familiar with switches or how to set them up. They're supposed to match the internet speeds—like 40 down and 15 up on wired connections, but wireless can vary a lot. If you need advice, there are guides online that explain what specs to look for. You might want to check forums or tech sites for recommendations. I appreciate the effort, even if it seems a bit overwhelming.
Cisco provides comprehensive guides on this topic, though you might need to check details for a particular device if you choose one. https://www.cisco.com/c/en/us/solutions/...h-how.html Another choice could be a router with a bigger switch built-in, offering more rear ports. Unfortunately, I lack in-depth knowledge of wireless networking; I try to steer clear of it. I prefer using a powerline adapter instead of going wireless. That said, my initial guess is there must be some interference causing the instability and erratic behavior. I apologize if it took time to respond—life’s been a bit more unpredictable lately, so I went all-in at level 10 and ended up with a 12.
The device includes a router and WiFi adapter. The WiFi channel is moderately used. To set up Ubiquiti WiFiman on your phone, navigate to the channels tab. Avoid interference by ensuring no other networks share the same channel. Adjust the channel manually in router settings if needed. Test local network speed using iperf: run server mode on a wired machine and client mode on the connected wireless device. For more Ethernet ports, consider an unmanaged gigabit switch such as TP-Link TL-SG105, ZyXEL GS-105Bv3, or D-Link DGS-108.
Thanks to all the support, I went to the computer store and bought a 5-port switch the person suggested. The results look good with solid speeds of 40/15 on both machines. It seems wireless might be best avoided for now.