F5F Stay Refreshed Hardware Desktop White VGA indicator on Asus motherboard

White VGA indicator on Asus motherboard

White VGA indicator on Asus motherboard

Pages (2): 1 2 Next
N
NarwhalKicks
Junior Member
9
12-05-2016, 03:50 AM
#1
Hello. Can you confirm if the VGA light changes are happening during boot-up and describe the exact color sequence you see? Also, have you checked any recent updates or repairs on your motherboard?
N
NarwhalKicks
12-05-2016, 03:50 AM #1

Hello. Can you confirm if the VGA light changes are happening during boot-up and describe the exact color sequence you see? Also, have you checked any recent updates or repairs on your motherboard?

O
oliverkosunen
Member
50
12-05-2016, 07:29 AM
#2
Yes, the system is loading the OS correctly. The white VGA LED might indicate GPU wake-up issues or a display detection failure. Make sure your monitor is powered on and ready before proceeding.
O
oliverkosunen
12-05-2016, 07:29 AM #2

Yes, the system is loading the OS correctly. The white VGA LED might indicate GPU wake-up issues or a display detection failure. Make sure your monitor is powered on and ready before proceeding.

A
Arnaer
Member
126
12-05-2016, 09:12 AM
#3
I tested three different monitors and used the same GPU on another computer, and it functioned properly. However, when I power it on, it displays "no signal" and doesn't boot.
A
Arnaer
12-05-2016, 09:12 AM #3

I tested three different monitors and used the same GPU on another computer, and it functioned properly. However, when I power it on, it displays "no signal" and doesn't boot.

J
Jellos
Junior Member
5
12-12-2016, 05:52 PM
#4
It seems like you're checking if the issue persists across devices. Just to clarify, you've tested three different monitors on this machine and it's not booting properly. Are you sure you're confirming the problem with just one setup? Consider swapping cables or ports to see if that resolves the issue. If that doesn't work, try resetting CMOS. I know you've used similar components before, but it might help to focus on your current system's specifics—like BIOS settings or RAM configuration—to pinpoint what's failing. You could also swap out one component at a time and see if the problem shifts. If none of these steps help, a BIOS flashback might be necessary.
J
Jellos
12-12-2016, 05:52 PM #4

It seems like you're checking if the issue persists across devices. Just to clarify, you've tested three different monitors on this machine and it's not booting properly. Are you sure you're confirming the problem with just one setup? Consider swapping cables or ports to see if that resolves the issue. If that doesn't work, try resetting CMOS. I know you've used similar components before, but it might help to focus on your current system's specifics—like BIOS settings or RAM configuration—to pinpoint what's failing. You could also swap out one component at a time and see if the problem shifts. If none of these steps help, a BIOS flashback might be necessary.

M
mastahkillah
Junior Member
7
12-13-2016, 01:59 AM
#5
I checked various cables and cleared the CMOS again, but the issue persists. You should connect one RAM stick at a time and try using a different port to see which one works best.
M
mastahkillah
12-13-2016, 01:59 AM #5

I checked various cables and cleared the CMOS again, but the issue persists. You should connect one RAM stick at a time and try using a different port to see which one works best.

W
Wiiplaya1234
Member
64
12-13-2016, 02:53 AM
#6
Refer to your manual for details. On the board, near the slots, there might be a star next to the slot text indicating the main slot.
W
Wiiplaya1234
12-13-2016, 02:53 AM #6

Refer to your manual for details. On the board, near the slots, there might be a star next to the slot text indicating the main slot.

_
_Skroutz_
Junior Member
43
01-01-2017, 07:21 PM
#7
It's likely to work, but putting them in the wrong slot might cause issues.
_
_Skroutz_
01-01-2017, 07:21 PM #7

It's likely to work, but putting them in the wrong slot might cause issues.

J
Jyok
Member
144
01-08-2017, 12:36 PM
#8
As long as you shut down the system and disconnect the power cable, it won’t start correctly. That’s a classic situation—just like a ship that’s already sailed.
J
Jyok
01-08-2017, 12:36 PM #8

As long as you shut down the system and disconnect the power cable, it won’t start correctly. That’s a classic situation—just like a ship that’s already sailed.

T
TitoPvP17
Member
62
01-19-2017, 08:35 PM
#9
I checked every available RAM slot and different types of RAM, but nothing worked. I also reviewed the motherboard manual to see what stage the BIOS is in—maybe that gives some clues. (Thanks for your patience so far; I hope this gets resolved.)
T
TitoPvP17
01-19-2017, 08:35 PM #9

I checked every available RAM slot and different types of RAM, but nothing worked. I also reviewed the motherboard manual to see what stage the BIOS is in—maybe that gives some clues. (Thanks for your patience so far; I hope this gets resolved.)

D
Dat_Asian_
Member
146
01-27-2017, 05:14 AM
#10
You seem to have a problem, and it looks like you might be experiencing something similar.
D
Dat_Asian_
01-27-2017, 05:14 AM #10

You seem to have a problem, and it looks like you might be experiencing something similar.

Pages (2): 1 2 Next