What type of cable is suitable for overclocking a monitor?
What type of cable is suitable for overclocking a monitor?
I own a 27es HP monitor. I didn't realize you could increase the refresh rate of a monitor, so please forgive my ignorance on this topic. My monitor supports both VGA and HDMI ports. I have a GTX 1060 with 6GB of RAM. When I adjust the settings in the NVIDIA control panel, I can reach up to 80Hz. However, when I try to apply changes, I encounter a warning that says "input signal lost" and then it starts counting down from 30 to put the monitor to sleep. It seems some people think the HDMI cable's bandwidth isn't sufficient. I found out that DVI cables perform well during overclocking, and there are newer HDMI cables that are better suited for this purpose. The issue is that my monitor doesn’t show compatibility with these HDMI cables. I have three questions: If I buy a converter cable (HDMI to DVI), will it be more powerful than the one I currently use? Can my monitor handle updated HDMI cables for overclocking? Is this monitor capable of supporting overclocking, or should I look for a different cable that offers better bandwidth? If anyone can recommend a cable that would improve my overclocking performance, please share it.
You can't simply push everything to whatever level you desire. Certain displays have limited overclocking capabilities. For example, my Asus monitor could only reach up to 67Hz before it failed. Before purchasing a new cable, try increasing the frequency by one Hz at a time until you discover the highest stable refresh rate. This process is similar to any other overclocking approach.
volkgren :
You can't just push everything overclocked as you wish. Some displays only allow a small increase in speed. For example, my Asus monitor would only reach 67Hz before it stopped working. Before purchasing a new cable, try raising the frequency by one Hz at a time until you find the stable maximum refresh rate. This process is similar to any other overclocking attempt. I'm familiar with this—I increased by one each time. When I reached 80Hz, the test confirmed success and asked if you wanted to apply those settings. If I went to 81, my screen would go black, but at 80 it passed the test. However, when I tried to set it, the monitor would display an error saying "input signal not found." After checking, I realized that "input signal" might refer to the cable bandwidth.
Also, does using a DVI to HDMI converter cable offer advantages over a standard HDMI cable because you've heard DVI can be superior to HDMI?
Also, do you think a DVI to HDMI converter cable is superior to a regular HDMI cable because DVI is considered better than HDMI? No.