What steps can help resolve frame drops, stutters, and boost overall performance?
What steps can help resolve frame drops, stutters, and boost overall performance?
Yes, I previously cleared CMOS. The only modifications I made were updating the DRAM frequency to 5600, turning off Asus MCE, and turning on Intel dynamic tuning. This might not matter much, but when opening valorant it asked me to enable TPM 2.0. Since I already had it enabled, I had to adjust my BIOS settings by disabling and then re-enabling it, which felt unusual because it was already active.
Okay. After everything you've tried, there are only two options left. Reinstall windows or return the GPU.
Have you another system you could use to see if it's the same? Otherwise you could bring it to a local store and get them to test it for you.
The situation involved reinstalling Windows twice. The first time it failed to install the network driver during setup, so I had to add it manually during the format process of the second installation. My previous build worked fine with the GPU, so this isn't a hardware issue. While assembling the PC, I took care to handle everything carefully. This was also my first experience without needing to manage cables—only the necessary ones were used, and fans are connected via one cable each, with four fan groups and a single controller. I was impressed by how much space remained after completion.
The interesting part is that I ordered the same motherboard twice because I assumed the card was broken when the network driver wasn't working properly, but I realized I needed to install the driver for it to function. It seems this is something new with reinstalling Windows. I built another system right after using a z690 board and still faced the same issue with the network driver not appearing. Once the driver was installed, everything worked smoothly on that setup, unlike my previous one. Now, focusing on the current problem, the PCIe socket needs cleaning. I used an electric air blower before installing anything, and once everything was in place for a final dusting, it resolved the issue. I wish I could explain more, but I’m unsure what to do next. This new setup has caused me the most trouble compared to all the others I’ve built. I mostly rely on trial and error, but this is beyond my understanding. I hope there’s another post like this where someone can quickly help with the problem, as it’s really frustrating.