F5F Stay Refreshed Hardware Desktop What sets Ram apart?

What sets Ram apart?

What sets Ram apart?

M
Mr_Floobiful
Posting Freak
890
05-25-2021, 04:46 AM
#1
I received a build from a Redux update. The system has an AMD 5 processor, 32GB DDR5 4800 RAM, and a GTX 3070. I upgraded my RAM to match the same specifications. After installing it in the BIOS, I noticed the new RAM operates at a different voltage (1.1V). If the BIOS isn’t set to an overclock profile, it runs at 3600MHz. When it’s on a specific profile, it switches to 5200MHz or 4800MHz depending on the setting. This seems like a standard overclock rather than a full overclocking attempt. I haven’t adjusted anything beyond what’s necessary and want to confirm I’m using the correct components without risking damage.
M
Mr_Floobiful
05-25-2021, 04:46 AM #1

I received a build from a Redux update. The system has an AMD 5 processor, 32GB DDR5 4800 RAM, and a GTX 3070. I upgraded my RAM to match the same specifications. After installing it in the BIOS, I noticed the new RAM operates at a different voltage (1.1V). If the BIOS isn’t set to an overclock profile, it runs at 3600MHz. When it’s on a specific profile, it switches to 5200MHz or 4800MHz depending on the setting. This seems like a standard overclock rather than a full overclocking attempt. I haven’t adjusted anything beyond what’s necessary and want to confirm I’m using the correct components without risking damage.

O
OcelotLover123
Junior Member
6
05-25-2021, 10:37 AM
#2
Intels XMP and AMD's EXPO are settings that allow RAM to operate beyond its original speed rating. Because of legal requirements, all RAM must come with its standard speed out of the box. You need to enable the overclock yourself using XMP or EXPO in the BIOS. There’s no assurance it will work, but the RAM is tested and rated for that speed, resulting in a low failure rate.

There’s nothing inherently wrong—your system won’t short or get harmed. It might trigger a BSOD (Blue Screen of Death) if the overclock becomes unstable. You can attempt to run at 4800MHz afterward. The BSOD is not dangerous; it’s a protective measure against damage.
O
OcelotLover123
05-25-2021, 10:37 AM #2

Intels XMP and AMD's EXPO are settings that allow RAM to operate beyond its original speed rating. Because of legal requirements, all RAM must come with its standard speed out of the box. You need to enable the overclock yourself using XMP or EXPO in the BIOS. There’s no assurance it will work, but the RAM is tested and rated for that speed, resulting in a low failure rate.

There’s nothing inherently wrong—your system won’t short or get harmed. It might trigger a BSOD (Blue Screen of Death) if the overclock becomes unstable. You can attempt to run at 4800MHz afterward. The BSOD is not dangerous; it’s a protective measure against damage.

N
NoWay_Cyb3r
Junior Member
2
05-25-2021, 11:26 AM
#3
Thank you for your note. I'm used to working with laptops that have limited capabilities, and I was familiar with BSDOS. I just wanted to confirm I got the same memory configuration so it wouldn't be forced to run slower or compromise performance when I could have gotten it right away.
N
NoWay_Cyb3r
05-25-2021, 11:26 AM #3

Thank you for your note. I'm used to working with laptops that have limited capabilities, and I was familiar with BSDOS. I just wanted to confirm I got the same memory configuration so it wouldn't be forced to run slower or compromise performance when I could have gotten it right away.