What modifications could I make to this prebuilt Lenovo Legion T5 setup?
What modifications could I make to this prebuilt Lenovo Legion T5 setup?
Hi! I'm new to this forum, so please forgive any oversight regarding conventions for posting.
I own a prebuilt Lenovo Legion T5 26AMR5 model, number 90RC0042MW.
It might be compatible with certain parts listed on the Lenovo website, but I wasn't able to verify it because my serial number wasn't recognized (I've taken apart the system so far).
You can check here: https://pcsupport.lenovo.com/us/en/...eg...compatible
I believe I purchased it between 2020 and 2021.
The specifications are:
CPU: Ryzen 5 3600
GPU: GeForce RTX 2060 (generic)
MBD: AMD B550 (custom or generic)
I've already replaced the RAM with a Corsair LPX Vengeance 2x16 GB module in dual channels, which helped for multitasking. I also swapped the SSD from a generic Samsung unit to a Samsung 970 EVO Plus NVMe M.2 with 1 TB capacity for the C: drive.
The fans seem quite poor, and the PSU is a "HuntKey HK650-15PP" (https://bbs.io-tech.fi/threads/hunt...ah...ki.524530/), which has mostly negative reviews online.
If you need a better PSU, I have another link available.
My main concern isn't the fan noise—it's actually surprisingly quiet even under heavy load (compared to my previous ACER Predator build that sounded like a jet engine).
I'm worried about potential failure soon due to component quality. I might be overreacting, but I'm also paying attention to what others say about these brands.
The CPU cooler is made of metal with a fan on top; you can find more info here: https://www.google.com/url?sa=i&url=http...AdAAAAABAE
I'm seeking advice on improving the system. Could I upgrade to a cooler like Arctic Freeze or Noctua? On a tight budget, how can I make this work—keep it quiet enough, handle moderate games smoothly, and avoid stuttering (even when playing Hearthstone)?
The GPU space is limited by the case; I’d expect around 290–300 mm for a card.
My initial thought was a full rebuild, but the case seems too restrictive for major changes—especially since the motherboard might be outdated.
Most of the 3000 series cards are too large for this build, and moving to an RTX 3070-Ti would likely not be worth it.
So I’m planning a completely new setup with more budget, aiming for better cooling, silence, and performance for games like Hogwarts Legacy without stuttering.
Could you suggest suitable fans, a replacement PSU, and a GPU that fits? Also, are there any compatibility issues I should watch out for when swapping parts?
I was considering an RTX 3070-Ti if it fits, or perhaps a better Radeon card instead of the RTX 2060.
Ray tracing isn’t crucial, and I’ve read that Radeon options might offer better value if ray tracing isn’t important. It should handle lower-end games and run Photoshop without issues.
Thanks in advance, and sorry for any confusion with this post.
Welcome to the forums, newcomer!
My initial concern is about the limitations in the BIOS settings. I wouldn’t invest in a prebuilt system because any modifications you make would be better saved for a fresh build. The B550 chipset could support DDR4-3600MHz, which means some performance gains are missing if you stick with DDR4-3200MHz RAM, unless you matched the specifications of the standard RAM included with the prebuilt unit.
That Huntkey model isn’t very reliable. You didn’t mention your location, preferred purchasing site, or your budget for GPU, PSU, and fans. Budget varies a lot, which is why we ask for specific numbers rather than vague estimates.
I’m worried about system stability due to the component quality. I might be overreacting, but I’m also paying attention to what others say about these manufacturers. Prebuilt units often have cut corners because the brand wants to maximize profits. The board in a prebuilt unit usually lacks VRM cooling, which could lead to early failure.
You can modify the case if it restricts your upgrade choices.
The motherboard is a typical mATX model.
Standard PSU connections and fan connectors are included.
There are no clear compatibility problems with regular parts.
This is influenced by your budget. We don't know how much you're prepared to invest.
Thank you for your message. I understand what BIOS is and its limitations. I concur that it's not worthwhile to invest further in prebuilt systems, particularly when purchasing new parts. My goal is simply to maximize the performance of the remaining components so my girlfriend can enjoy playing Hogwarts Legacy.
For the RAM, I kept the same specifications, but the original unit was just one stick, likely around 8 GB. I used a generic Samsung model and replaced it with Corsair LPX Vengeance 2x16 GB.
Regarding my location, I'm in northern Europe. I searched online for a PSU, but based on what I know, any ATX PS/2 compatible unit should work—provided it fits the case and isn't a HuntKey or similar.
I reviewed some benchmarks on PSUs, but I'm having trouble interpreting them. It's unclear if it makes sense to mix cheaper components together. I'd prefer something that is quiet yet reliable.
Also, I didn't mention my budget clearly. I aim to spend between 300 and 400 euros (320 to 430 USD) just to refine this prebuilt setup.
What I would like to change is the fans, the PSU, the CPU, and the GPU. I might have mentioned these before, so I apologize for repeating myself.
Lastly, my budget is around 300-400 euros. I want to ensure the build stays within that range.
My main changes would be on the fans, the power supply, the CPU, and the graphics card. I apologize again for the repetition.
Additionally, I'm trying to learn about installing SSDs with heatsinks, which is something I've never encountered before. This made me think about the cooling system—maybe it's still holding up? I haven't been using performance mode much, which usually triggers overclocking, so perhaps that was a good choice.
Is it worth it? Or would it be better to switch the GPU and see if that helps? Anything that is better than the RTX 2060 and will fit the case would do.
Okay, then i have understood it right. Thank you!
Yeah sorry, i forgot to mention my budget. Around 340-430 dollars (300-400 euros) if possible.