F5F Stay Refreshed Hardware Desktop What is dual+ channel XMP?

What is dual+ channel XMP?

What is dual+ channel XMP?

N
natek2015
Member
199
01-23-2019, 09:14 AM
#1
Hello everyone, today I purchased a new machine and checked its performance. I used a 3800X with a 5700XT motherboard, 16GB DDR4 RAM at 3200MHz. XMP was enabled in the BIOS, but my Task Manager shows memory running at 3200MHz while an alert appears on userbenchmark.com. What’s going wrong with my setup? Thanks in advance, José.
N
natek2015
01-23-2019, 09:14 AM #1

Hello everyone, today I purchased a new machine and checked its performance. I used a 3800X with a 5700XT motherboard, 16GB DDR4 RAM at 3200MHz. XMP was enabled in the BIOS, but my Task Manager shows memory running at 3200MHz while an alert appears on userbenchmark.com. What’s going wrong with my setup? Thanks in advance, José.

H
Ha12Nn6aH3
Member
138
01-23-2019, 10:18 AM
#2
Are you utilizing slots two and four on your motherboard? (starting from the left). If yes, don't stress too much about this alert.
H
Ha12Nn6aH3
01-23-2019, 10:18 AM #2

Are you utilizing slots two and four on your motherboard? (starting from the left). If yes, don't stress too much about this alert.

M
mxspear
Member
58
01-27-2019, 07:20 PM
#3
Yes, I understand. I also verified and need to prioritize slots 2 and 4 first, which I am following. The motherboard features a small layout near the four RAM slots, indicating that I should start there. Thank you for your response!
M
mxspear
01-27-2019, 07:20 PM #3

Yes, I understand. I also verified and need to prioritize slots 2 and 4 first, which I am following. The motherboard features a small layout near the four RAM slots, indicating that I should start there. Thank you for your response!

1
111carys111
Posting Freak
832
01-27-2019, 10:14 PM
#4
The site suddenly ceased showing the issue. I checked the BIOS briefly but didn’t adjust any settings linked to DDR, so... I’m not sure what caused it.
1
111carys111
01-27-2019, 10:14 PM #4

The site suddenly ceased showing the issue. I checked the BIOS briefly but didn’t adjust any settings linked to DDR, so... I’m not sure what caused it.

A
Almazik
Member
56
02-01-2019, 10:36 AM
#5
That's likely what occurred...
A
Almazik
02-01-2019, 10:36 AM #5

That's likely what occurred...

B
Bigking
Member
154
02-02-2019, 05:24 PM
#6
Sure! I can suggest some free alternatives for benchmarking your computer. What kind of performance metrics are you interested in testing?
B
Bigking
02-02-2019, 05:24 PM #6

Sure! I can suggest some free alternatives for benchmarking your computer. What kind of performance metrics are you interested in testing?

L
ladymorepork
Posting Freak
791
02-09-2019, 03:28 AM
#7
cinebench unigine benchmark valley, heaven and superposition
L
ladymorepork
02-09-2019, 03:28 AM #7

cinebench unigine benchmark valley, heaven and superposition

M
mcrafter5279
Member
128
02-09-2019, 10:58 AM
#8
Thanks for your response! I'll check them out.
M
mcrafter5279
02-09-2019, 10:58 AM #8

Thanks for your response! I'll check them out.