Want to begin your operating system installation and need guidance?

F5F Stay Refreshed Power Users Overclocking Want to begin your operating system installation and need guidance?

Want to begin your operating system installation and need guidance?

Want to begin your operating system installation and need guidance?

Pages (3): Previous 1 2 3 Next

7

77sx77
Junior Member

19

03-02-2016, 03:18 AM

#11

I'll let you know after I play some tonight. It only spikes there for a brief moment a couple of times, it was stable in the mid to upper 60s and only one core was spiking into the 80s as I mentioned, though for a split second.

7

77sx77

03-02-2016, 03:18 AM #11

I'll let you know after I play some tonight. It only spikes there for a brief moment a couple of times, it was stable in the mid to upper 60s and only one core was spiking into the 80s as I mentioned, though for a split second.

C

chenglee1998
Member

147

03-04-2016, 05:00 PM

#12

While gaming reached its maximum temperature of 70C, the main problem was that the game would crash a few times. It seems the issue might be related to CPU or GPU overclocking, but it's not clear if a reboot was needed.

C

chenglee1998

03-04-2016, 05:00 PM #12

While gaming reached its maximum temperature of 70C, the main problem was that the game would crash a few times. It seems the issue might be related to CPU or GPU overclocking, but it's not clear if a reboot was needed.

P

PreciousWizard
Junior Member

3

03-05-2016, 01:34 PM

#13

Consider reducing the GPU overclock and see how it performs; if it fails, try increasing the CPU voltage. It works well for me and stays within safe temperature limits. High for my preference but still completely safe.

P

PreciousWizard

03-05-2016, 01:34 PM #13

Consider reducing the GPU overclock and see how it performs; if it fails, try increasing the CPU voltage. It works well for me and stays within safe temperature limits. High for my preference but still completely safe.

J

josbakmeel2000
Member

169

03-05-2016, 01:57 PM

#14

Reduced the GPU OC settings and it appeared to fix the problem, planning to try again tomorrow. Also, before I even pushed this chip overclock, it would have stayed around the low 60s even with the Corsair H100i.

J

josbakmeel2000

03-05-2016, 01:57 PM #14

Reduced the GPU OC settings and it appeared to fix the problem, planning to try again tomorrow. Also, before I even pushed this chip overclock, it would have stayed around the low 60s even with the Corsair H100i.

L

Legojoe8
Member

70

03-13-2016, 12:33 PM

#15

Wow, not much improvement in temperature. Still decent.
For optimal temperatures, consider removing the CPU, using Liquid Ultra or Liquid Pro between the die and IHS, and reinstalling the IHS. This should significantly lower your temps.
I’ve fully delidded my board, so I’m running bare die. Liquid Pro cut my temps by about 15 degrees compared to MX4. Previously at 5GHz I was around 90 under full load, but now I’m around 70. Usually much better.

L

Legojoe8

03-13-2016, 12:33 PM #15

Wow, not much improvement in temperature. Still decent.
For optimal temperatures, consider removing the CPU, using Liquid Ultra or Liquid Pro between the die and IHS, and reinstalling the IHS. This should significantly lower your temps.
I’ve fully delidded my board, so I’m running bare die. Liquid Pro cut my temps by about 15 degrees compared to MX4. Previously at 5GHz I was around 90 under full load, but now I’m around 70. Usually much better.

M

mminchich
Member

149

03-13-2016, 01:04 PM

#16

It seems you're not sure about going to that extreme, but it might actually help reduce your temperature.

M

mminchich

03-13-2016, 01:04 PM #16

It seems you're not sure about going to that extreme, but it might actually help reduce your temperature.

Z

zNoouz_
Senior Member

259

03-13-2016, 10:02 PM

#17

It does help alot but if you are fin with your temps then theres no need.

Z

zNoouz_

03-13-2016, 10:02 PM #17

It does help alot but if you are fin with your temps then theres no need.

T

trawberr112
Member

129

03-14-2016, 04:45 AM

#18

You provided a reference to a video or demonstration so you can avoid using your CPU during the process.

T

trawberr112

03-14-2016, 04:45 AM #18

You provided a reference to a video or demonstration so you can avoid using your CPU during the process.

S

Stifelplays
Member

112

03-15-2016, 01:21 PM

#19

The same procedure applies but using a 4790K instead. You may opt for nail polish as an alternative to the silicon for covering the surface mount parts.

S

Stifelplays

03-15-2016, 01:21 PM #19

The same procedure applies but using a 4790K instead. You may opt for nail polish as an alternative to the silicon for covering the surface mount parts.

X

XxAJHxX
Junior Member

18

03-22-2016, 06:33 PM

#20

And you don't have to adjust the IHS. Since the Liquid pro will solidify and serve as the adhesive, just ensure it's installed precisely in your system to maintain proper alignment. This way, if you ever need to service the CPU, it will appear as though nothing went wrong.

X

XxAJHxX

03-22-2016, 06:33 PM #20

And you don't have to adjust the IHS. Since the Liquid pro will solidify and serve as the adhesive, just ensure it's installed precisely in your system to maintain proper alignment. This way, if you ever need to service the CPU, it will appear as though nothing went wrong.

Pages (3): Previous 1 2 3 Next