Voltage level for Ram device

226

04-26-2016, 12:10 PM

You're experiencing voltage fluctuations while trying to change the RAM speed. It seems the system is adjusting the voltage dynamically. To address this, you might try setting a manual offset value for the RAM when changing speeds. Check your BIOS settings or manufacturer guidelines for recommended offsets. If the issue persists, consider consulting the hardware documentation for specific instructions on RAM voltage adjustments.

n_tiffanyblue_

04-26-2016, 12:10 PM #1

xwing75
Junior Member

05-12-2016, 07:51 AM

xwing75

05-12-2016, 07:51 AM #2

zamys
Senior Member

690

05-13-2016, 07:14 PM

The value 1.39 appears to be suitable for around eight hours of daily use. No heat buildup should occur since the device lacks a heatsink.

zamys

05-13-2016, 07:14 PM #3

The value 1.39 appears to be suitable for around eight hours of daily use. No heat buildup should occur since the device lacks a heatsink.

FlashTw
Junior Member

05-14-2016, 01:38 AM

It's okay even with just 1.45V; results might change in terms of performance or stability, but battery life shouldn't be affected. Heat isn't an issue as long as you don't trap them in a foam pack—each stick should use no more than 2-3W.

FlashTw

05-14-2016, 01:38 AM #4

Gatoscrim
Junior Member

05-18-2016, 01:40 AM

Thanks!

Gatoscrim

05-18-2016, 01:40 AM #5

Thanks!