F5F Stay Refreshed Hardware Desktop VGA and boot LED not responding after power on

VGA and boot LED not responding after power on

VGA and boot LED not responding after power on

S
Slide7
Member
148
11-17-2022, 05:56 AM
#1
Setting up a fresh setup for a family member this Christmas. Components used: Ryzen 5 5600G (bought from Memory Express), Asus Dual RX6600 (arrived today from Newegg via Purolator), ASRock B550M Pro 4 (ready for Ryzen 5000, box stamped, received Friday 12/03 from Newegg via Purolator), 16GB Corsair Vengeance LPX 3600mhz CMK16GX4M2D3600C18 (Amazon purchase), SN750 500GB boot drive (Amazon), and a 650w PSU Gold+Bronze (pre-built test passed, no post required). All power connectors are secured. Initial checks: CPU tested, memory in A2 & B2 slots, GPU connected, LED debug shows BOOT and VGA active. No post, black screen appeared. Fans spun on both the CPU cooler and GPU.

Steps undertaken:
1. Swapped DRAM to only one stick in the leftmost slot – no change.
2. Removed GPU, plugged in Display port cable directly to motherboard for iGPU use – no change.
3. Found online advice suggesting no SSD or NVME caused failure; installed NVME – no change.
4. Followed manual instructions to clear CMOS – no change.
5. Moved GPU to a secondary PCI slot – no change.
6. Swapped personal R7 3800X into CPU socket – no change.
7. Swapped personal RX5700XT into the first PCI slot – no change.
8. Swapped personal G.SKILL F4-3200C16D-16GTZRX (Trident Z 3200mhz 8GBx2) into slot A1 – no change.
9. Swapped personal RX6600 to verify it wouldn’t cause DOA – passed successfully.
10. Installed R5 5600G on the system to rule out failure – passed successfully.
11. Placed Corsair Vengeance LPX memory (one stick at a time) into slot A1 – passed.
12. Reinstalled and rebuilt all personal hardware back onto the motherboard – system booted normally. (Currently being used for this thread.)
13. Reinstalled all new components onto a new motherboard – no post detected. VGA and BOOT debug lights lit up.

Potential issues remain: only possible cause could be a faulty motherboard. I’m submitting a support ticket with ASRock and seeking further guidance or tips. Thanks.
S
Slide7
11-17-2022, 05:56 AM #1

Setting up a fresh setup for a family member this Christmas. Components used: Ryzen 5 5600G (bought from Memory Express), Asus Dual RX6600 (arrived today from Newegg via Purolator), ASRock B550M Pro 4 (ready for Ryzen 5000, box stamped, received Friday 12/03 from Newegg via Purolator), 16GB Corsair Vengeance LPX 3600mhz CMK16GX4M2D3600C18 (Amazon purchase), SN750 500GB boot drive (Amazon), and a 650w PSU Gold+Bronze (pre-built test passed, no post required). All power connectors are secured. Initial checks: CPU tested, memory in A2 & B2 slots, GPU connected, LED debug shows BOOT and VGA active. No post, black screen appeared. Fans spun on both the CPU cooler and GPU.

Steps undertaken:
1. Swapped DRAM to only one stick in the leftmost slot – no change.
2. Removed GPU, plugged in Display port cable directly to motherboard for iGPU use – no change.
3. Found online advice suggesting no SSD or NVME caused failure; installed NVME – no change.
4. Followed manual instructions to clear CMOS – no change.
5. Moved GPU to a secondary PCI slot – no change.
6. Swapped personal R7 3800X into CPU socket – no change.
7. Swapped personal RX5700XT into the first PCI slot – no change.
8. Swapped personal G.SKILL F4-3200C16D-16GTZRX (Trident Z 3200mhz 8GBx2) into slot A1 – no change.
9. Swapped personal RX6600 to verify it wouldn’t cause DOA – passed successfully.
10. Installed R5 5600G on the system to rule out failure – passed successfully.
11. Placed Corsair Vengeance LPX memory (one stick at a time) into slot A1 – passed.
12. Reinstalled and rebuilt all personal hardware back onto the motherboard – system booted normally. (Currently being used for this thread.)
13. Reinstalled all new components onto a new motherboard – no post detected. VGA and BOOT debug lights lit up.

Potential issues remain: only possible cause could be a faulty motherboard. I’m submitting a support ticket with ASRock and seeking further guidance or tips. Thanks.

S
spongebacon
Junior Member
2
11-17-2022, 05:56 AM
#2
Someone mentioned 650W is suitable for a modern gaming setup. For better performance, aim for 750W to 850W. That said, it’s not just about the number—consistent results matter. I verified this with all ten tests and confirmed it works as a top-tier motherboard.
S
spongebacon
11-17-2022, 05:56 AM #2

Someone mentioned 650W is suitable for a modern gaming setup. For better performance, aim for 750W to 850W. That said, it’s not just about the number—consistent results matter. I verified this with all ten tests and confirmed it works as a top-tier motherboard.

W
WoobzyWoobz
Member
73
11-17-2022, 05:56 AM
#3
Uncertain about the vibe, 650w seems enough for this setup.
W
WoobzyWoobz
11-17-2022, 05:56 AM #3

Uncertain about the vibe, 650w seems enough for this setup.

X
XRedDragonX
Member
79
11-17-2022, 05:56 AM
#4
Keep reminding folks that’s the same thing, and you’ll be a troll forever. I don’t aim to belittle anyone. A 650W power supply for a gaming rig was a concept from 2010 with no real foundation today. The next generation of hardware will demand even higher performance per watt.
X
XRedDragonX
11-17-2022, 05:56 AM #4

Keep reminding folks that’s the same thing, and you’ll be a troll forever. I don’t aim to belittle anyone. A 650W power supply for a gaming rig was a concept from 2010 with no real foundation today. The next generation of hardware will demand even higher performance per watt.