F5F Stay Refreshed Software PC Gaming Vent on the adjacent wall

Vent on the adjacent wall

Vent on the adjacent wall

Pages (2): 1 2 Next
M
Meteor__YT
Member
81
02-28-2025, 07:07 PM
#1
CASE-IN Win MaNa 136 Mid Tower.
This enclosure accommodates 7 fans; I initially intended to install 6, but ended up with 2 front, 1 rear, and 2 top fans, plus a final one on the side panel beneath the GPU. The front fans draw air in, while the top and back fans exhaust it, however, I’m questioning whether the side fan should expel air or direct cool air downwards directly below the GPU to utilize?
M
Meteor__YT
02-28-2025, 07:07 PM #1

CASE-IN Win MaNa 136 Mid Tower.
This enclosure accommodates 7 fans; I initially intended to install 6, but ended up with 2 front, 1 rear, and 2 top fans, plus a final one on the side panel beneath the GPU. The front fans draw air in, while the top and back fans exhaust it, however, I’m questioning whether the side fan should expel air or direct cool air downwards directly below the GPU to utilize?

1
10Justin
Member
105
02-28-2025, 07:07 PM
#2
I don’t need any auxiliary fans, they aren’t typically employed—you rarely observe their application.
1
10Justin
02-28-2025, 07:07 PM #2

I don’t need any auxiliary fans, they aren’t typically employed—you rarely observe their application.

N
niel4553
Junior Member
6
02-28-2025, 07:07 PM
#3
Ideally, a secondary fan would direct airflow towards the graphics card. The most effective arrangement involves front intake, top exhaust, side extraction, and rear push airflow.
N
niel4553
02-28-2025, 07:07 PM #3

Ideally, a secondary fan would direct airflow towards the graphics card. The most effective arrangement involves front intake, top exhaust, side extraction, and rear push airflow.

F
Fanman64FTW
Junior Member
24
02-28-2025, 07:07 PM
#4
Typically, the leading fan draws air inward into the enclosure; would it actually benefit from pushing air outward instead?
F
Fanman64FTW
02-28-2025, 07:07 PM #4

Typically, the leading fan draws air inward into the enclosure; would it actually benefit from pushing air outward instead?

A
aaron1506
Member
207
02-28-2025, 07:07 PM
#5
Indeed, air inlets are typically fronts.
A
aaron1506
02-28-2025, 07:07 PM #5

Indeed, air inlets are typically fronts.

H
hamoooood
Member
194
02-28-2025, 07:07 PM
#6
Ok so front push air in the car as well as side if I have it and then rear and top push out right?
Would you know if I is possibleto get to replace the side panel maybe with a glass one?
H
hamoooood
02-28-2025, 07:07 PM #6

Ok so front push air in the car as well as side if I have it and then rear and top push out right?
Would you know if I is possibleto get to replace the side panel maybe with a glass one?

M
MaxSwets
Junior Member
45
02-28-2025, 07:07 PM
#7
Shanks_1 :
Ok so front push air in the car as well as side if I have it and then rear and top push out right?
Would you know if I is possibleto get to replace the side panel maybe with a glass one?
YES , that is correct.
Panel not sure about.
M
MaxSwets
02-28-2025, 07:07 PM #7

Shanks_1 :
Ok so front push air in the car as well as side if I have it and then rear and top push out right?
Would you know if I is possibleto get to replace the side panel maybe with a glass one?
YES , that is correct.
Panel not sure about.

I
ice_age_ninja
Junior Member
18
02-28-2025, 07:07 PM
#8
Typically, the leading component draws air into the enclosure; would expelling air be beneficial? Yes, I apologize, the front element is intended to intake air. My error.
I
ice_age_ninja
02-28-2025, 07:07 PM #8

Typically, the leading component draws air into the enclosure; would expelling air be beneficial? Yes, I apologize, the front element is intended to intake air. My error.

F
Fluffycakes123
Senior Member
696
02-28-2025, 07:07 PM
#9
To explore different options, consider using both side panel fans for air intake while eliminating all other fans. Monitor temperatures and contrast them with your previous configuration. I typically achieve optimal cooling when fans are positioned to directly cool the motherboard, graphics card, and processor. If you have numerous storage devices, experiment with adding a rear exhaust fan to avoid conflicting with the side intake – as your primary airflow comes from the side panel, most other fans should operate as exhausts.
F
Fluffycakes123
02-28-2025, 07:07 PM #9

To explore different options, consider using both side panel fans for air intake while eliminating all other fans. Monitor temperatures and contrast them with your previous configuration. I typically achieve optimal cooling when fans are positioned to directly cool the motherboard, graphics card, and processor. If you have numerous storage devices, experiment with adding a rear exhaust fan to avoid conflicting with the side intake – as your primary airflow comes from the side panel, most other fans should operate as exhausts.

S
SivTheGreat
Member
209
02-28-2025, 07:07 PM
#10
Regarding your build, consider experimenting by using both side panel fans for intake and eliminating all other fans. Monitor temperatures and contrast them with your previous configuration. I generally achieve optimal cooling when fans directly cool the motherboard, graphics card, and processor. If you have numerous storage devices, incorporating an exhaust fan at the front can prevent airflow conflicts with the side intake (given that your primary intake is through the panel, subsequent airflow should be primarily exhaust).

My board supports a maximum of three fans; I utilize splitters to accommodate six. I have three static-pressure fans and three dynamic-pressure fans – where do you recommend their placement? Furthermore, there are metal frames obstructing airflow near the front fans, with limited openings for air passage.
S
SivTheGreat
02-28-2025, 07:07 PM #10

Regarding your build, consider experimenting by using both side panel fans for intake and eliminating all other fans. Monitor temperatures and contrast them with your previous configuration. I generally achieve optimal cooling when fans directly cool the motherboard, graphics card, and processor. If you have numerous storage devices, incorporating an exhaust fan at the front can prevent airflow conflicts with the side intake (given that your primary intake is through the panel, subsequent airflow should be primarily exhaust).

My board supports a maximum of three fans; I utilize splitters to accommodate six. I have three static-pressure fans and three dynamic-pressure fans – where do you recommend their placement? Furthermore, there are metal frames obstructing airflow near the front fans, with limited openings for air passage.

Pages (2): 1 2 Next