Various RAM configurations and dual-channel ports available.

Pages (2): 1 2 Next

evogeli
Member

249

02-17-2016, 08:32 AM

For dual-channel setup with matching modules, install the RAM in slots 1-2 and 3-4. This configuration ensures proper functionality.

evogeli

02-17-2016, 08:32 AM #1

For dual-channel setup with matching modules, install the RAM in slots 1-2 and 3-4. This configuration ensures proper functionality.

magun88
Junior Member

02-17-2016, 03:02 PM

Alternating slots are common on most boards, meaning you match pairs to the right colors.

magun88

02-17-2016, 03:02 PM #2

Alternating slots are common on most boards, meaning you match pairs to the right colors.

SpakmenRus2012
Member

232

02-17-2016, 04:07 PM

Assuming the clock speeds are identical, the MOBO model is an Asus Prime Z390-A. The RAM groupings don't align with standard codes.

SpakmenRus2012

02-17-2016, 04:07 PM #3

Assuming the clock speeds are identical, the MOBO model is an Asus Prime Z390-A. The RAM groupings don't align with standard codes.

DUCK30002
Junior Member

02-18-2016, 01:02 AM

They mentioned that mixed pairs require installation [1-2, 3-4], and alternating slots is just for one dual-channel unit. No official doc supports this yet.

DUCK30002

02-18-2016, 01:02 AM #4

They mentioned that mixed pairs require installation [1-2, 3-4], and alternating slots is just for one dual-channel unit. No official doc supports this yet.

BlueStar_LH
Posting Freak

842

02-18-2016, 11:58 AM

This statement suggests the assertion is incorrect.

BlueStar_LH

02-18-2016, 11:58 AM #5

This statement suggests the assertion is incorrect.

JJ123231
Junior Member

02-20-2016, 04:07 AM

I share this viewpoint. Setting them up this way lets the motherboard allocate varied timing for each channel, enhancing compatibility. However, if it functions with slots 1-3 and 2-4, you may keep it unchanged.

JJ123231

02-20-2016, 04:07 AM #6

3gilad3
Senior Member

735

02-20-2016, 08:33 AM

The motherboard guide dismisses advice from any "experienced experts."

3gilad3

02-20-2016, 08:33 AM #7

The motherboard guide dismisses advice from any "experienced experts."

gvn12345678
Member

242

02-20-2016, 10:05 AM

I reviewed the MOBO manual, which mentions 1 stick, 2 stick, and 4 stick setups... but no details on non-identical pairs. I assumed that since 2-4 are automatically dual-channel, the remaining channels (1-3) would form another channeled pair.

gvn12345678

02-20-2016, 10:05 AM #8

joshwars
Junior Member

02-20-2016, 02:55 PM

It will operate in single-channel mode using the specified timing settings, and it should also support dual-channel functionality across the ranges 1-2 and 3-4.

joshwars

02-20-2016, 02:55 PM #9

It will operate in single-channel mode using the specified timing settings, and it should also support dual-channel functionality across the ranges 1-2 and 3-4.

J0ebyron
Member

225

02-27-2016, 08:05 PM

#10

You usually notice better results when using paired dims in each channel. Occasionally you may face compatibility or stability issues, which are unexpectedly resolved by placing the dim pairs in mixed channels, though this isn't the perfect setup.

J0ebyron

02-27-2016, 08:05 PM #10

Pages (2): 1 2 Next