Using PCI lanes on the MSI PC MATE H110
Using PCI lanes on the MSI PC MATE H110
Hey, AMD RADEON HD 7770 x2 setup. When you run two cards in CrossFire, it sometimes shows two GPUs or one GPU plus a Wi-Fi card. From what I found, this happens because your chipset lacks enough PCI lanes, causing it to randomly switch between the second GPU or Wi-Fi card during restarts. You can’t have both active at once. Looking for ways in the BIOS to narrow the bus width per GPU—like 8x2 or 1x4 for Wi-Fi—to improve performance. Any tips or tricks?
Which slots are connected to the board? It shouldn't change unexpectedly, probably due to a poor connection on the second GPU or Wi-Fi card. The second GPU is also running on the Lanses chipset, which means it will be significantly slower than expected.