Using IPSRouter/Modem around the ISP router, connecting directly to OPNSENSE?
Using IPSRouter/Modem around the ISP router, connecting directly to OPNSENSE?
Hey! Some people have swapped their ISP router and modem with a direct fibre connection from the ISP’s ONT box. You mentioned having a 10Gbps SPF NIC in your OPNsense device, which could work if you get the right transceiver. Running on Telus fiber might be possible too. As for security, connecting directly to the ONT via a bridge setup could introduce risks—make sure you’re using strong encryption and keep your devices updated. The current bridge mode with an SFP transceiver is functional but worth reviewing for stability.
In theory yes, but you'd need a GPON SFP+ compatible transceiver and manage any authentication to access their network—this is usually the biggest uncertainty. I’d look through existing projects or contact people to check if anyone has done this before or (in the worst case) try contacting them for module specifications, though that’s unlikely.
So why waste time? I really wouldn’t mess around with ISP matters. They usually get too intense about their equipment.
We’re into the nitty-gritty, and that’s what we like. It seems unlikely the transceiver in their modem would automatically connect to my network without some setup, right? I’m still getting familiar with fiber networking, so please don’t ask too many questions about the technical details.
If it's removable there is a possibility but I wouldn't go pulling it out if it's locked in. Otherwise it couldn't hurt to try.
Could there be harm to the hardware if the wrong transceiver is placed in the incorrect location? Besides the obvious risk of physical damage, there’s also the chance of operational failure. I’ll attempt to extract it soon.
Have you contacted Telus regarding their suggestions? You're not alone in this question. Obtain accurate guidance from them as you attempt to change how their internet service reaches your home. I've noticed ISPs often block connections at a media converter (fiber to copper) and customers simply needed to install their own router. But since some fiber providers use ONTs for customer access, special login details or configurations were required on the router itself.
I haven’t had a chance to play around with it. They asked me about work right after I pressed the reply button. I’ll call Telus and find out what they have to say. It might be smarter to reach out first before things get tense.