F5F Stay Refreshed Hardware Desktop Using a Ryzen processor with a triple water cooler at high temperatures improves performance and stability.

Using a Ryzen processor with a triple water cooler at high temperatures improves performance and stability.

Using a Ryzen processor with a triple water cooler at high temperatures improves performance and stability.

Pages (2): 1 2 Next
W
Windiox
Member
226
06-02-2020, 07:17 AM
#1
I'm checking if everything is okay. I installed new parts and assembled the computer recently. The CPU temperature stays above 58°C when idle, and it spikes to around 90°C during games with the 5900X and Arctic 360 cooler. The cooler paste seems to help, but the temps are way higher than expected, and the CPU doesn't hit its full speed. I think it's throttling.
W
Windiox
06-02-2020, 07:17 AM #1

I'm checking if everything is okay. I installed new parts and assembled the computer recently. The CPU temperature stays above 58°C when idle, and it spikes to around 90°C during games with the 5900X and Arctic 360 cooler. The cooler paste seems to help, but the temps are way higher than expected, and the CPU doesn't hit its full speed. I think it's throttling.

L
LISK205
Junior Member
18
06-02-2020, 08:47 AM
#2
What kind of fasteners or brackets are you employing?
L
LISK205
06-02-2020, 08:47 AM #2

What kind of fasteners or brackets are you employing?

K
kechum123
Member
51
06-02-2020, 09:26 AM
#3
Make sure it's installed correctly.
K
kechum123
06-02-2020, 09:26 AM #3

Make sure it's installed correctly.

X
XRedDragonX
Member
79
06-07-2020, 09:41 AM
#4
Ensure all steps were followed correctly during installation.
X
XRedDragonX
06-07-2020, 09:41 AM #4

Ensure all steps were followed correctly during installation.

E
evogeli
Member
249
06-13-2020, 03:19 PM
#5
The tools and components included in the package for my cooler
E
evogeli
06-13-2020, 03:19 PM #5

The tools and components included in the package for my cooler

I
Infamousy
Member
207
06-15-2020, 08:32 AM
#6
I've noticed this too, and the pump/cpu block is located at the bottom of the system.
I
Infamousy
06-15-2020, 08:32 AM #6

I've noticed this too, and the pump/cpu block is located at the bottom of the system.

M
Miyuumi
Senior Member
543
06-15-2020, 11:23 AM
#7
I watched the (rev 3.0) video but not the other one. In rev 3.0 there were some mismatches with the video, though not in a problematic way. Looking back it seems like a warning sign. I’m considering switching to the other video and remounting; honestly I’m unsure if I have the 3.0 or versions 1.0/2.0, since no numbers on the cooler or box give any clues.
M
Miyuumi
06-15-2020, 11:23 AM #7

I watched the (rev 3.0) video but not the other one. In rev 3.0 there were some mismatches with the video, though not in a problematic way. Looking back it seems like a warning sign. I’m considering switching to the other video and remounting; honestly I’m unsure if I have the 3.0 or versions 1.0/2.0, since no numbers on the cooler or box give any clues.

G
GTH1
Junior Member
28
06-15-2020, 03:53 PM
#8
The installation components from Arctic have been modified several times.
G
GTH1
06-15-2020, 03:53 PM #8

The installation components from Arctic have been modified several times.

M
Maxim69rus
Member
215
06-15-2020, 08:27 PM
#9
Found it, thanks! It's version 3.0. I watched their tutorial and tried mounting it again. I'll share here if it helps.
M
Maxim69rus
06-15-2020, 08:27 PM #9

Found it, thanks! It's version 3.0. I watched their tutorial and tried mounting it again. I'll share here if it helps.

N
nonrnonr
Member
241
06-15-2020, 10:25 PM
#10
N
nonrnonr
06-15-2020, 10:25 PM #10

Pages (2): 1 2 Next