F5F Stay Refreshed Hardware Desktop used a power cable for the PSU that wasn’t securely connected.

used a power cable for the PSU that wasn’t securely connected.

used a power cable for the PSU that wasn’t securely connected.

T
the5harkman
Senior Member
542
12-17-2016, 02:05 AM
#1
During the initial startup, the PSU power cable was loosely connected, triggering a red CPU indicator and preventing display. After several restarts, turning the PC off and flipping the PSU switch twice resolved the issue temporarily, allowing me to boot into BIOS and install Windows via USB. Once installed, I reinstalled drivers and software before shutting down. When I attempted to power on again, the red light persisted without a display. After securing the PSU cable firmly and flipping the switch twice, the problem disappeared, and I successfully launched Windows. Could this repeated loose connection have caused any damage? Reinstalling Windows seems reasonable despite the current slow boot time of about 19 seconds, which might relate to fast boot being disabled. My motherboard is an ASRock X870 Steel Legend, the PSU is Seasonic Focus GX750.
T
the5harkman
12-17-2016, 02:05 AM #1

During the initial startup, the PSU power cable was loosely connected, triggering a red CPU indicator and preventing display. After several restarts, turning the PC off and flipping the PSU switch twice resolved the issue temporarily, allowing me to boot into BIOS and install Windows via USB. Once installed, I reinstalled drivers and software before shutting down. When I attempted to power on again, the red light persisted without a display. After securing the PSU cable firmly and flipping the switch twice, the problem disappeared, and I successfully launched Windows. Could this repeated loose connection have caused any damage? Reinstalling Windows seems reasonable despite the current slow boot time of about 19 seconds, which might relate to fast boot being disabled. My motherboard is an ASRock X870 Steel Legend, the PSU is Seasonic Focus GX750.

J
juju66700
Member
68
12-17-2016, 02:29 AM
#2
The software would have worked correctly if the PSU provided power to the board. Otherwise, the system would have stopped, and the lengthy startup was likely due to RAM issues.
J
juju66700
12-17-2016, 02:29 AM #2

The software would have worked correctly if the PSU provided power to the board. Otherwise, the system would have stopped, and the lengthy startup was likely due to RAM issues.

S
scrayfel
Junior Member
2
12-19-2016, 01:36 PM
#3
The sole reason abrupt power cuts harm anything is if they occur during file writing. Even then, the main issue is a corrupted file.
S
scrayfel
12-19-2016, 01:36 PM #3

The sole reason abrupt power cuts harm anything is if they occur during file writing. Even then, the main issue is a corrupted file.