F5F Stay Refreshed Hardware Desktop USB header adapters for motherboards connect USB ports to your computer.

USB header adapters for motherboards connect USB ports to your computer.

USB header adapters for motherboards connect USB ports to your computer.

D
DTAZ7124
Junior Member
Find
22
04-05-2017, 10:39 PM
#1
Hello! Your new case seems compatible with your current setup, but you might want to verify the USB headers on your motherboard. Since you only use front I/O for a Yubikey and a flash drive, upgrading isn’t necessary. If you decide to use adapters like those from PC Part Picker, pay attention to speed limitations and ensure the recommended products are well-reviewed. For an adapter converting USB 3.2 Gen 1 to 3.2 Gen 2, the USB C port should still function, but confirm the specifications match your needs. Let me know if you need more details!
Reply
Reply
D
DTAZ7124
04-05-2017, 10:39 PM #1

Hello! Your new case seems compatible with your current setup, but you might want to verify the USB headers on your motherboard. Since you only use front I/O for a Yubikey and a flash drive, upgrading isn’t necessary. If you decide to use adapters like those from PC Part Picker, pay attention to speed limitations and ensure the recommended products are well-reviewed. For an adapter converting USB 3.2 Gen 1 to 3.2 Gen 2, the USB C port should still function, but confirm the specifications match your needs. Let me know if you need more details!

Reply
Reply
M
MacSolaris
Senior Member
Find
457
04-11-2017, 02:18 PM
#2
The motherboard is the main circuit board inside a computer. USB-C connects via a Type-E connector, and while a Type-E to 19-pin USB3 adapter might work, it would require using the USB3 protocol and consume your internal header. PCPartPicker recommended an adapter for compatibility.
Reply
Reply
M
MacSolaris
04-11-2017, 02:18 PM #2

The motherboard is the main circuit board inside a computer. USB-C connects via a Type-E connector, and while a Type-E to 19-pin USB3 adapter might work, it would require using the USB3 protocol and consume your internal header. PCPartPicker recommended an adapter for compatibility.

Reply
Reply
M
MineaBeef
Junior Member
Find
34
04-13-2017, 01:47 PM
#3
I have a MSI B450 TOMAHAWK MAX. Sorry my phrasing was a bit off. They didn't suggest a specific one, they just suggested the use of one.
Reply
Reply
M
MineaBeef
04-13-2017, 01:47 PM #3

I have a MSI B450 TOMAHAWK MAX. Sorry my phrasing was a bit off. They didn't suggest a specific one, they just suggested the use of one.

Reply
Reply
G
Gurbugak
Junior Member
Find
17
04-13-2017, 02:36 PM
#4
You can either connect the Type-C port to a 9pin USB2 adapter and use the TypeA USB3 front I/O as a USB3 connection, or switch to a 19/20-pin USB3 adapter for the Type-C and then use the USB3 port for the Type-A front I/O.
Reply
Reply
G
Gurbugak
04-13-2017, 02:36 PM #4

You can either connect the Type-C port to a 9pin USB2 adapter and use the TypeA USB3 front I/O as a USB3 connection, or switch to a 19/20-pin USB3 adapter for the Type-C and then use the USB3 port for the Type-A front I/O.

Reply
Reply
S
sniper3609
Member
Find
59
04-25-2017, 08:26 AM
#5
Alright, I'll take a look. Thanks!
Reply
Reply
S
sniper3609
04-25-2017, 08:26 AM #5

Alright, I'll take a look. Thanks!

Reply
Reply
C
connor8c
Member
Find
163
05-05-2017, 11:04 PM
#6
The setup includes two USB 3 ports at 5 GBps and one USB Type-C port. The two USB 3 ports link via the standard 20-pin connector, while the USB Type-C uses a newer connector. The motherboard features one USB 3 header (20 pins) and several USB 2 headers. You can link the two USB 3 ports straight to the USB 3.0 header and leave the USB Type-C disconnected. Alternatively, you might purchase an adapter that transforms the USB 3.0 header into the Type-C connector, allowing the Type-C port to be connected. Here are some suggestions: Amazon.com offers a linkup adapter for converting the internal header to the new connector. Another choice is a converter kit that lets you plug the Type-C port into the existing header. Another idea is to use an extension cable to connect the Type-C port to the back connector, or install an additional USB 3 controller card that includes the USB 3.0 header.
Reply
Reply
C
connor8c
05-05-2017, 11:04 PM #6

The setup includes two USB 3 ports at 5 GBps and one USB Type-C port. The two USB 3 ports link via the standard 20-pin connector, while the USB Type-C uses a newer connector. The motherboard features one USB 3 header (20 pins) and several USB 2 headers. You can link the two USB 3 ports straight to the USB 3.0 header and leave the USB Type-C disconnected. Alternatively, you might purchase an adapter that transforms the USB 3.0 header into the Type-C connector, allowing the Type-C port to be connected. Here are some suggestions: Amazon.com offers a linkup adapter for converting the internal header to the new connector. Another choice is a converter kit that lets you plug the Type-C port into the existing header. Another idea is to use an extension cable to connect the Type-C port to the back connector, or install an additional USB 3 controller card that includes the USB 3.0 header.

Reply
Reply