Upgrading DDR4 PNY XLR8 low-profile 3600 MHz CL18 module at 1.35V with two 16 GB sticks
Upgrading DDR4 PNY XLR8 low-profile 3600 MHz CL18 module at 1.35V with two 16 GB sticks
Hello, I'm using an Intel 12400 on an MSI B760M board. I swapped my 16GB 3000MHz setup for a 32GB 3600MHz model. Performance is slightly lower, but it seems to run better at 3200MHz CL16 than at 3600MHz CL18. I'm currently at 3200MHz with various voltages. Do you have a simple suggestion to improve it? (Or maybe it's time to wrap up) Edited June 20, 2023 by leclod
I might have achieved that. Currently I should be at 3600MHz with settings 18,20,20,40,60,2T Gear and 1.36V. It seems to perform slightly better on the CPU Z bench. Stability remains a concern—I still need to verify XMP is active when I try it. Edited June 20, 2023 by leclod
Many 12400s aren't compatible with Gear 1 at 3600. You might have one of them. Lower it to 3466 or 3200 and stop experimenting. Using VDDQ TX can sometimes help, but it usually doesn't. I wouldn't waste time unless you're specifically aiming for 3600.