F5F Stay Refreshed Hardware Desktop Upgraded system, cutting-edge components, and a bit of tech stress...

Upgraded system, cutting-edge components, and a bit of tech stress...

Upgraded system, cutting-edge components, and a bit of tech stress...

R
RedFoxxGaming
Member
178
11-22-2022, 04:36 AM
#1
Hey there, I'm trying to figure this out... I just installed a new PC with these specs: CPU - AMD Ryzen 9 7900X, Motherboard - ASUS ROG STRIX x670E-E Gaming Wi-Fi (latest BIOS), RAM - GSKill Trident Z Neo (non-RGB), AMD Expo 32GB (2x16), GPU - Zotac RTX 3080 12G LHR, Power Supply - EVGA 1000P3, Storage - two Samsung 980 Evo drives (1TB and 2TB), OS - Windows 11 version 21H2.

Problem #1: On startup, it takes about 5 minutes for the PC to boot and log in to Windows. The first few megabytes show a C5 memory error, then after a while it works on its own. The monitor turns on gradually, followed by the keyboard and then the OS. It's really frustrating and not sure why this happens.

Problem #2: I use this machine for work. Some programs need Windows 11 memory integrity disabled. When I turn that setting off, the computer freezes at least a few times a day. Usually it starts one app at a time—like YouTube losing audio, then the video plays but the interface freezes, the desktop slows down, and eventually the whole system crashes without any BSOD or error messages. If I leave memory integrity enabled, the freezing stops, but I can't see how the two issues connect. I've tried a fresh installation and it still works the same.
R
RedFoxxGaming
11-22-2022, 04:36 AM #1

Hey there, I'm trying to figure this out... I just installed a new PC with these specs: CPU - AMD Ryzen 9 7900X, Motherboard - ASUS ROG STRIX x670E-E Gaming Wi-Fi (latest BIOS), RAM - GSKill Trident Z Neo (non-RGB), AMD Expo 32GB (2x16), GPU - Zotac RTX 3080 12G LHR, Power Supply - EVGA 1000P3, Storage - two Samsung 980 Evo drives (1TB and 2TB), OS - Windows 11 version 21H2.

Problem #1: On startup, it takes about 5 minutes for the PC to boot and log in to Windows. The first few megabytes show a C5 memory error, then after a while it works on its own. The monitor turns on gradually, followed by the keyboard and then the OS. It's really frustrating and not sure why this happens.

Problem #2: I use this machine for work. Some programs need Windows 11 memory integrity disabled. When I turn that setting off, the computer freezes at least a few times a day. Usually it starts one app at a time—like YouTube losing audio, then the video plays but the interface freezes, the desktop slows down, and eventually the whole system crashes without any BSOD or error messages. If I leave memory integrity enabled, the freezing stops, but I can't see how the two issues connect. I've tried a fresh installation and it still works the same.

F
fpandolfo
Member
51
11-22-2022, 04:53 AM
#2
Have you looked for a BIOS update? It could resolve memory compatibility problems. If not, I recommend using Memtest 86 to check for errors, as your concerns relate to memory performance. Windows also offers a built-in memory diagnostic tool worth trying.
F
fpandolfo
11-22-2022, 04:53 AM #2

Have you looked for a BIOS update? It could resolve memory compatibility problems. If not, I recommend using Memtest 86 to check for errors, as your concerns relate to memory performance. Windows also offers a built-in memory diagnostic tool worth trying.

L
loltribo
Posting Freak
870
12-08-2022, 04:22 AM
#3
I updated it about a month ago after building it, and just did the latest two days ago. The problem still exists. I’m planning to run Memtest 86 and share the results. I’m not sure how to interpret them since I haven’t used the program before. Thanks for the suggestion!
L
loltribo
12-08-2022, 04:22 AM #3

I updated it about a month ago after building it, and just did the latest two days ago. The problem still exists. I’m planning to run Memtest 86 and share the results. I’m not sure how to interpret them since I haven’t used the program before. Thanks for the suggestion!

N
Nickpresident
Junior Member
46
12-12-2022, 11:40 PM
#4
Memtest mainly checks for errors and reports whether issues were detected. Also, do you have XMP/DOCP activated, or are you using the default settings?
N
Nickpresident
12-12-2022, 11:40 PM #4

Memtest mainly checks for errors and reports whether issues were detected. Also, do you have XMP/DOCP activated, or are you using the default settings?

C
Caydoyo
Member
73
12-14-2022, 12:09 AM
#5
AMD EXPO is enabled, boosting my memory from 4000MHz to 6000MHz as intended. All core clocks and other settings remain factory defaults.
C
Caydoyo
12-14-2022, 12:09 AM #5

AMD EXPO is enabled, boosting my memory from 4000MHz to 6000MHz as intended. All core clocks and other settings remain factory defaults.

M
micg912
Junior Member
17
12-25-2022, 08:18 PM
#6
Consider disabling the feature temporarily. Even if it’s supposed to work, performance might improve. I’d reset the BIOS and verify stability. (Following memory checks could also help identify RAM problems)
M
micg912
12-25-2022, 08:18 PM #6

Consider disabling the feature temporarily. Even if it’s supposed to work, performance might improve. I’d reset the BIOS and verify stability. (Following memory checks could also help identify RAM problems)

P
PaigeOfTheBook
Senior Member
733
12-26-2022, 04:47 AM
#7
The memory test passed with no errors. I tested it without AMD Expo enabled, and it still didn’t work as expected. Interestingly, after restarting after completing the test, the computer booted up much faster—though it wasn’t ideal, since it felt unusual compared to how it usually starts.
P
PaigeOfTheBook
12-26-2022, 04:47 AM #7

The memory test passed with no errors. I tested it without AMD Expo enabled, and it still didn’t work as expected. Interestingly, after restarting after completing the test, the computer booted up much faster—though it wasn’t ideal, since it felt unusual compared to how it usually starts.