F5F Stay Refreshed Hardware Desktop Upgrade your system by using a custom motherboard designed for the new CPU model.

Upgrade your system by using a custom motherboard designed for the new CPU model.

Upgrade your system by using a custom motherboard designed for the new CPU model.

E
Eroski
Junior Member
39
05-06-2016, 05:04 PM
#1
I need to swap out a defective CPU in an outdated OEM system. Because it's an older model, the processor generation is quite old. I'm planning to install a newer CPU and a modern motherboard, but I'm uncertain if the existing motherboard model will still work with the new firmware. I've included a photo of the Dell Vostro motherboard from the manual.
E
Eroski
05-06-2016, 05:04 PM #1

I need to swap out a defective CPU in an outdated OEM system. Because it's an older model, the processor generation is quite old. I'm planning to install a newer CPU and a modern motherboard, but I'm uncertain if the existing motherboard model will still work with the new firmware. I've included a photo of the Dell Vostro motherboard from the manual.

A
aurodude
Member
202
05-23-2016, 11:00 AM
#2
If I had more details, this device would resemble Micro Channel, though it was released long before SATA or USB existed. More information about the hardware—manufacturer, model, socket design, etc.—would be very useful. Details on the circuit board and possibly a photo inside the case would help clarify its unusual layout.
A
aurodude
05-23-2016, 11:00 AM #2

If I had more details, this device would resemble Micro Channel, though it was released long before SATA or USB existed. More information about the hardware—manufacturer, model, socket design, etc.—would be very useful. Details on the circuit board and possibly a photo inside the case would help clarify its unusual layout.

S
SuperboyLama
Member
109
05-23-2016, 12:20 PM
#3
That's a case-specific motherboard, so unless Dell reused the same case for multiple generations with the same motherboard layout you're probably out of luck. That's a very proprietary motherboard. It's a mostly standard motherboard with an extension for the front panel I/O. All of the front I/O is part of the motherboard itself, not the case. The board shown in the picture isn't terribly old.
S
SuperboyLama
05-23-2016, 12:20 PM #3

That's a case-specific motherboard, so unless Dell reused the same case for multiple generations with the same motherboard layout you're probably out of luck. That's a very proprietary motherboard. It's a mostly standard motherboard with an extension for the front panel I/O. All of the front I/O is part of the motherboard itself, not the case. The board shown in the picture isn't terribly old.

_
_Dumle03_
Member
158
05-27-2016, 11:04 PM
#4
So I admitted if I wasn't sure. It's just tough to pinpoint the vintage here.
_
_Dumle03_
05-27-2016, 11:04 PM #4

So I admitted if I wasn't sure. It's just tough to pinpoint the vintage here.

S
Shadow_Fiend
Junior Member
11
06-01-2016, 08:53 AM
#5
It was released around 2017, features an LGA 1151 socket, carries the Dell Service code BNV81H2. It only works with Intel 6th generation chips, but you can find a more affordable version using the 9th generation.
S
Shadow_Fiend
06-01-2016, 08:53 AM #5

It was released around 2017, features an LGA 1151 socket, carries the Dell Service code BNV81H2. It only works with Intel 6th generation chips, but you can find a more affordable version using the 9th generation.

V
vegetta2777
Junior Member
40
06-01-2016, 09:59 AM
#6
It seems likely a 6th generation Intel processor from around 2015 or 2016 was used.
V
vegetta2777
06-01-2016, 09:59 AM #6

It seems likely a 6th generation Intel processor from around 2015 or 2016 was used.

D
Deixid
Junior Member
47
06-01-2016, 11:15 AM
#7
Dell often creates proprietary hardware, making it likely that newer motherboards won’t fit. If you locate a compatible board, you might need a different power supply unless it matches the original layout. Investing in a standard ATX setup is usually more practical, allowing you to reuse existing storage and RAM (if DDR4). If you lack additional components, choose a CPU that fits your current board. Here’s a quick guide to new parts: for graphics cards, an i3-12100f can save you money; the GPU price is around $30. https://pcpartpicker.com/list/mDjbhk
D
Deixid
06-01-2016, 11:15 AM #7

Dell often creates proprietary hardware, making it likely that newer motherboards won’t fit. If you locate a compatible board, you might need a different power supply unless it matches the original layout. Investing in a standard ATX setup is usually more practical, allowing you to reuse existing storage and RAM (if DDR4). If you lack additional components, choose a CPU that fits your current board. Here’s a quick guide to new parts: for graphics cards, an i3-12100f can save you money; the GPU price is around $30. https://pcpartpicker.com/list/mDjbhk