Upgrade failed, PC remains unresponsive.
Upgrade failed, PC remains unresponsive.
Hello, I recently attempted to upgrade my graphics card from 2700x to 3700x on the Rog Strix B450-F gaming board. Before that, I updated my BIOS to the latest version since I hadn't changed it for two years. Everything worked perfectly with the 2700x, but after switching to 3700x, I encountered issues. The PC won’t boot and displays a yellow LED indicating a DRAM problem. I have two 8GB RAM sticks at 3200MHz and tried different configurations—placing them in various slots, using only one stick at a time, resetting the CMOS by removing and reinserting the battery, short-circuiting special pins, and even reinstalling the CPU. After that, the board booted up again. Could this be related to the BIOS update? Also, I don’t have a USB drive available for formatting to FAT32, and I had to download the BIOS update online, making it impossible to revert to older versions. Any advice would be greatly appreciated.
Following a CPU upgrade, your PC will undergo RAM training. Allow it to rest for some time.
It usually takes around ten minutes, but it can vary depending on your system.
It may require some time. It could be more than ten minutes. Allow it to proceed.
I see, the good news is that there are newer version I share the link below for you to check it out while waiting for the RAM training https://rog.asus.com/motherboards/rog-st...desk_bios/ Hope this could help