Updating computer components
Updating computer components
For the stress test, I recommend options like Tm5, HCI Memtest, or alternatives such as P95 large FFTs. This isn’t ideal, but at least Ballistix is reasonably priced and many systems can handle 4600+ c18/17 (1.6v+). The bottleneck is likely the motherboard, which can be costly—high-end models like the 16GB Viper 4400 C19 cost as much as a full 32GB kit. A dedicated OC chip is strictly for overclocking only; running it without an OC will hurt performance significantly compared to its price. A 3200 c14 won’t differ much from a 3200 c16 since bandwidth exceeds latency, though timing matters. The decision to stick with OC depends on your needs.
Ballistix (rev e) is lighter on the IMX and may offer better stability than OC chips, even without an OC. It’s also cheaper—around $23 per stick on eBay—making it a solid choice for budget builds. If you’re targeting 3600 c16 at 1.35-1.4v with lazy OC, setup is straightforward.
A more affordable alternative is the PBC 2666 with rev e bins from D9VPP to C9BJZ (3200 bin). It matches the 4600+ clock speed, costs about $23 per stick, and runs similarly. It’s a great value for performance without breaking the bank.
The main downsides are the quality of the PCB and aesthetics—generic RAM often doesn’t affect speed much, and a green bare board isn’t a big deal. What matters is getting a reliable, high-speed solution that fits your budget.
I'm not sure, but people have noticed Corsair PSUs have been inconsistent lately. Before buying, it's smart to research thoroughly. If there are past issues, skip this model. Otherwise, it might be worth it. But if problems exist, better stick with SeaSonic or another reliable brand—they generally perform well despite higher prices.
@westly NZXT's recommended 750 for this case is 150Lx150Wx86H (mm). The PSU I recommended is 160Lx150Wx86H (mm). So you should probably measure from the back wall where the PSU mounts to about two to three inches from running out of room to get your max PSU length (I don't see it listed anywhere). It probably will fit, most of the time 10mm is not that big of a difference, just makes it a bit tight. But I would measure to be sure.
You're certain the device is functioning well. I've identified a possible issue with a random no video on boot, focusing on cable or HDMI connections.
Interpret what’s being said. Although OC isn’t the primary goal, based on my view, 3200 likely needed to be adjusted from a starting speed of 2666 to hit 3200, as it appears here.