F5F Stay Refreshed Hardware Desktop Updated version for 7800x3d / Curve optimizer

Updated version for 7800x3d / Curve optimizer

Updated version for 7800x3d / Curve optimizer

A
AniStarYT
Member
Find
57
04-20-2023, 04:36 AM
#1
Hello everyone, I just completed my new rig using a 7800 x3d and wanted to tweak it before installing games. I often read about undervolting to boost temps and performance. Under full load my temps hit 78°C. PBO is enabled but no curve optimizer is active. Is the optimizer safe? What if it stops because of instability? How do I return to BIOS? Attached are the stats from running Cinebench 2024. Thanks for your support!
Reply
Reply
A
AniStarYT
04-20-2023, 04:36 AM #1

Hello everyone, I just completed my new rig using a 7800 x3d and wanted to tweak it before installing games. I often read about undervolting to boost temps and performance. Under full load my temps hit 78°C. PBO is enabled but no curve optimizer is active. Is the optimizer safe? What if it stops because of instability? How do I return to BIOS? Attached are the stats from running Cinebench 2024. Thanks for your support!

Reply
Reply
O
oml
Junior Member
Find
17
05-03-2023, 08:13 AM
#2
Go back to the BIOS settings and pull the under-voltage a bit more aggressively. These temperatures stay manageable with PBO enabled, especially during full load. Once you shut it down before reaching under-voltage, check if performance improves.
Reply
Reply
O
oml
05-03-2023, 08:13 AM #2

Go back to the BIOS settings and pull the under-voltage a bit more aggressively. These temperatures stay manageable with PBO enabled, especially during full load. Once you shut it down before reaching under-voltage, check if performance improves.

Reply
Reply
_
_jose211594
Junior Member
Find
15
05-03-2023, 10:03 AM
#3
It depends on the situation—some devices restart automatically, while others require resetting the CMOS settings before starting over.
Reply
Reply
_
_jose211594
05-03-2023, 10:03 AM #3

It depends on the situation—some devices restart automatically, while others require resetting the CMOS settings before starting over.

Reply
Reply
X
xXHufflePuffXx
Member
Find
206
05-04-2023, 03:28 AM
#4
It will simply restart. CO is quite secure, right? Open it and adjust the settings to NEGATIVE 30 for all cores max. Test it and observe the results. If it doesn’t work, you can target individual cores or lower the setting further. My setup uses -30 for most cores except a few exceptions.
Reply
Reply
X
xXHufflePuffXx
05-04-2023, 03:28 AM #4

It will simply restart. CO is quite secure, right? Open it and adjust the settings to NEGATIVE 30 for all cores max. Test it and observe the results. If it doesn’t work, you can target individual cores or lower the setting further. My setup uses -30 for most cores except a few exceptions.

Reply
Reply