F5F Stay Refreshed Hardware Desktop Updated motherboard, RAM and CPU installed, but system fails to start.

Updated motherboard, RAM and CPU installed, but system fails to start.

Updated motherboard, RAM and CPU installed, but system fails to start.

K
Kingston_Games
Junior Member
44
09-10-2019, 10:30 AM
#1
You recently purchased an upgraded system including a new motherboard, 16GB DDR4 RAM, and a Ryzen 5 3600X CPU. When attempting to connect all cables to the motherboard, the system fails to boot. Consider checking connections, power supply stability, and BIOS settings.
K
Kingston_Games
09-10-2019, 10:30 AM #1

You recently purchased an upgraded system including a new motherboard, 16GB DDR4 RAM, and a Ryzen 5 3600X CPU. When attempting to connect all cables to the motherboard, the system fails to boot. Consider checking connections, power supply stability, and BIOS settings.

F
FureaMC
Senior Member
564
09-10-2019, 11:43 AM
#2
Remove the device from its enclosure and attach it to the motherboard tray, then check if it boots. Avoid linking any storage devices during this process. Also, once removed, ensure the enclosure is cleaned.
F
FureaMC
09-10-2019, 11:43 AM #2

Remove the device from its enclosure and attach it to the motherboard tray, then check if it boots. Avoid linking any storage devices during this process. Also, once removed, ensure the enclosure is cleaned.

R
Rottenbaby13
Member
62
09-10-2019, 12:28 PM
#3
Are the RAM sticks fully seated? They seem slightly tilted in the photo. Your cooler fan is running backward—it should be directing air toward the exhaust fan in the case. A good clean of the case and additional cable organization would also make a difference.
R
Rottenbaby13
09-10-2019, 12:28 PM #3

Are the RAM sticks fully seated? They seem slightly tilted in the photo. Your cooler fan is running backward—it should be directing air toward the exhaust fan in the case. A good clean of the case and additional cable organization would also make a difference.