Unusual USB gadget (BT adapter) causing system to fail boot
Unusual USB gadget (BT adapter) causing system to fail boot
So uh here's an interesting one I have this generic and basic USB Bluetooth adapter, whenever I have it plugged in (any usb port, front panel or mobo) and hit the power switch, Ill get fan spin, screen is on but no post, can't even go into the bios As soon as I pull it out, boot will resume normally After boot I can plug it back and use it just fine anyone knows what's causing this ? And if it's possible to not have to plug it out for every post ? 774F7957-4CB3-4552-A902-26EE694D2609.mov
Initially, after connecting it, you didn't see a driver installation alert or Windows prompt. Instead, it immediately began using the standard Microsoft BT driver, which is also listed in the Bluetooth section of Device Manager as generic Microsoft drivers. However, I also notice three entries under "other devices" when the device is connected.
I also changed the boot sequence so USB devices come last. I found out that in BIOS setup, plugging something in causes it to freeze completely, but unplugging it lets it thaw. It’s kind of odd—it feels like a BIOS pause button.