Unusual recollection problems This is what’s been happening lately.

F5F Stay Refreshed Hardware Desktop Unusual recollection problems This is what’s been happening lately.

srgalcapone
Junior Member

02-10-2023, 11:26 AM

I'm experiencing an unusual memory problem. I recently replaced two sticks, matching the same frequency and timing, but my PC won't boot after installing them. I tried adjusting the frequency to 2133MHz, which is the maximum speed available, but now it's not running at its rated rate. The system still shows issues with BIOS and memory settings. I've also updated BIOS, reset it, and changed XMP settings, yet performance remains poor. Any suggestions?

srgalcapone

02-10-2023, 11:26 AM #1

levirad
Junior Member

02-10-2023, 06:35 PM

Do you have four sticks installed? Resetting the BIOS to its default settings (found in the BIOS menu) differs from clearing CMOS; the latter significantly reduces functionality.

levirad

02-10-2023, 06:35 PM #2

Do you have four sticks installed? Resetting the BIOS to its default settings (found in the BIOS menu) differs from clearing CMOS; the latter significantly reduces functionality.

Bmxer298
Junior Member

02-24-2023, 10:46 AM

Increase voltage slightly to 1.4 and adjust frequency to 2933. It could help. If that doesn't work, settle for 2800—it won't change much from there.

Bmxer298

02-24-2023, 10:46 AM #3

Increase voltage slightly to 1.4 and adjust frequency to 2933. It could help. If that doesn't work, settle for 2800—it won't change much from there.

ben_dragon
Senior Member

259

03-05-2023, 02:05 AM

I'm sticking with the Viper kit you mentioned earlier. I'll attempt a clear CMOS next, but I need to take out my GPU to access the battery.

ben_dragon

03-05-2023, 02:05 AM #4

I'm sticking with the Viper kit you mentioned earlier. I'll attempt a clear CMOS next, but I need to take out my GPU to access the battery.

gamerpgf
Member

175

03-15-2023, 02:53 AM

two connections on the mainboard can be disabled by connecting a metal item between them, which also clears the cmos. this method is accurate, not by taking out the power source.

gamerpgf

03-15-2023, 02:53 AM #5

two connections on the mainboard can be disabled by connecting a metal item between them, which also clears the cmos. this method is accurate, not by taking out the power source.

RainyToast
Member

03-15-2023, 11:04 AM

RainyToast

03-15-2023, 11:04 AM #6