F5F Stay Refreshed Power Users Overclocking Unusual RAM compatibility and CPU overclocking problems

Unusual RAM compatibility and CPU overclocking problems

Unusual RAM compatibility and CPU overclocking problems

M
MaggieTheMouse
Junior Member
1
07-29-2024, 10:58 PM
#1
The rated (XMP) speed for that RAM is likely around 2400Mhz or higher based on the timings observed. The model number provided matches the information found in my tools.
M
MaggieTheMouse
07-29-2024, 10:58 PM #1

The rated (XMP) speed for that RAM is likely around 2400Mhz or higher based on the timings observed. The model number provided matches the information found in my tools.

J
Jay43full
Junior Member
6
07-29-2024, 10:58 PM
#2
These questions seem a bit confusing, but here’s what you should know:
Are you placing the RAM in the dual-channel slots?
The motherboard you referred to has four slots—are you connecting the RAM correctly?
Also, could you share the model numbers of both RAM sticks?
Typically, when setting up a kit, you connect RAM to slots 1 and 3 (the two black ones) first, then 2 and 4. You don’t start at the last slot.
I’ve never faced many problems with dual-channel RAM, even with different brands or speeds.
Regarding overclocking, adding more RAM increases the current flowing through the CPU’s IMC, which could affect power delivery to other components, possibly requiring higher voltages for overclocking.
J
Jay43full
07-29-2024, 10:58 PM #2

These questions seem a bit confusing, but here’s what you should know:
Are you placing the RAM in the dual-channel slots?
The motherboard you referred to has four slots—are you connecting the RAM correctly?
Also, could you share the model numbers of both RAM sticks?
Typically, when setting up a kit, you connect RAM to slots 1 and 3 (the two black ones) first, then 2 and 4. You don’t start at the last slot.
I’ve never faced many problems with dual-channel RAM, even with different brands or speeds.
Regarding overclocking, adding more RAM increases the current flowing through the CPU’s IMC, which could affect power delivery to other components, possibly requiring higher voltages for overclocking.

L
LorrenK
Senior Member
703
07-29-2024, 10:58 PM
#3
Increasing the amount of RAM will slow down your CPU because it needs to handle more data between additional memory modules. The person you spoke to was mostly trying to persuade you, but the outcome depends on your motherboard. In some situations, it might not work at all. It’s best to purchase a 2x8GB package if you need 16GB, since most boards only support dual-channel configurations. I suggest getting a new set of 2x8GB sticks, which should let you run at least 2133MHz with XMP enabled without significantly impacting your CPU performance. It’s also worth checking if the RAM speed was manually adjusted, as this can sometimes be lower than expected. If you’re using 8GB, make sure it matches the advertised 2133MHz. Consider bringing both sticks back and asking for a 2x8GB kit—this person seems unfamiliar with proper RAM setup.
L
LorrenK
07-29-2024, 10:58 PM #3

Increasing the amount of RAM will slow down your CPU because it needs to handle more data between additional memory modules. The person you spoke to was mostly trying to persuade you, but the outcome depends on your motherboard. In some situations, it might not work at all. It’s best to purchase a 2x8GB package if you need 16GB, since most boards only support dual-channel configurations. I suggest getting a new set of 2x8GB sticks, which should let you run at least 2133MHz with XMP enabled without significantly impacting your CPU performance. It’s also worth checking if the RAM speed was manually adjusted, as this can sometimes be lower than expected. If you’re using 8GB, make sure it matches the advertised 2133MHz. Consider bringing both sticks back and asking for a 2x8GB kit—this person seems unfamiliar with proper RAM setup.

C
CrzNoah
Member
90
07-29-2024, 10:58 PM
#4
The specified RAM supports single-channel operation with an 8GB capacity using DDR4 Vengeance memory (16-18-18-18-35). The rated XMP speed appears to be around 2400MHz or higher, based on the observed timings. The model number provided matches the information.
C
CrzNoah
07-29-2024, 10:58 PM #4

The specified RAM supports single-channel operation with an 8GB capacity using DDR4 Vengeance memory (16-18-18-18-35). The rated XMP speed appears to be around 2400MHz or higher, based on the observed timings. The model number provided matches the information.