F5F Stay Refreshed Hardware Desktop Unusual performance issues with the Ryzen 9 5900X

Unusual performance issues with the Ryzen 9 5900X

Unusual performance issues with the Ryzen 9 5900X

Pages (2): 1 2 Next
S
SoulzReaped
Member
217
01-04-2020, 04:14 AM
#1
Hey, I recently swapped in the Ryzen 9 5900X to swap out my i9-10850KA and installed a new motherboard. When I open the BIOS, it shows the CPU at -1°C. The voltage readings look off: around 4V on the 3.3V rail, 10V on the 5V rail, and 24V on the 12V rail. The CPU reports running at 2.04V in ASUS Armoury Crate. I’m really worried about this. When I load Cinebench R23 under full stress, it hits 4.2GHz with a score of 16230—slightly lower than a Threadripper 1950X. It’s running at about 70°C with the Noctua NH-D15 and NT-H1 paste.
S
SoulzReaped
01-04-2020, 04:14 AM #1

Hey, I recently swapped in the Ryzen 9 5900X to swap out my i9-10850KA and installed a new motherboard. When I open the BIOS, it shows the CPU at -1°C. The voltage readings look off: around 4V on the 3.3V rail, 10V on the 5V rail, and 24V on the 12V rail. The CPU reports running at 2.04V in ASUS Armoury Crate. I’m really worried about this. When I load Cinebench R23 under full stress, it hits 4.2GHz with a score of 16230—slightly lower than a Threadripper 1950X. It’s running at about 70°C with the Noctua NH-D15 and NT-H1 paste.

S
Skyguy_
Member
228
01-11-2020, 05:19 PM
#2
Windows reinstallation can sometimes cause unusual voltage readings, which usually aren't a big concern unless you're using the drives. Without a SATA drive in use, things look fine. The CPU voltage seems off—could be an auto power on issue. Your Cinebench score is roughly 4000 points below average.
S
Skyguy_
01-11-2020, 05:19 PM #2

Windows reinstallation can sometimes cause unusual voltage readings, which usually aren't a big concern unless you're using the drives. Without a SATA drive in use, things look fine. The CPU voltage seems off—could be an auto power on issue. Your Cinebench score is roughly 4000 points below average.

M
MerelTijger
Junior Member
48
01-12-2020, 08:10 AM
#3
I own six SATA drives, including two that are combined in Windows.
M
MerelTijger
01-12-2020, 08:10 AM #3

I own six SATA drives, including two that are combined in Windows.

S
Sammy706
Member
79
01-12-2020, 09:22 AM
#4
The voltage readings seem odd. Did you reinstall Windows after moving the platform?
S
Sammy706
01-12-2020, 09:22 AM #4

The voltage readings seem odd. Did you reinstall Windows after moving the platform?

X
Xytrixz
Senior Member
552
01-14-2020, 01:26 AM
#5
I added the AMD drivers but didn't reinstall them.
X
Xytrixz
01-14-2020, 01:26 AM #5

I added the AMD drivers but didn't reinstall them.

X
xEchoz
Member
208
01-14-2020, 09:52 AM
#6
Check your setup with a Ryzen 5 3400G first. If it works, the issue might be elsewhere like BIOS, motherboard, or power supply. Otherwise, consider a faulty BIOS, bad RAM, or PSU.
X
xEchoz
01-14-2020, 09:52 AM #6

Check your setup with a Ryzen 5 3400G first. If it works, the issue might be elsewhere like BIOS, motherboard, or power supply. Otherwise, consider a faulty BIOS, bad RAM, or PSU.

N
Niqeria
Junior Member
9
01-30-2020, 07:55 PM
#7
Update the BIOS to version 2802, which was released around the 5000 series launch. Since then, many fixes have been added for those CPUs. It’s not advised to install the newest chipset driver on an older BIOS version; AMD specifically warns users to update the BIOS first before changing the driver.
N
Niqeria
01-30-2020, 07:55 PM #7

Update the BIOS to version 2802, which was released around the 5000 series launch. Since then, many fixes have been added for those CPUs. It’s not advised to install the newest chipset driver on an older BIOS version; AMD specifically warns users to update the BIOS first before changing the driver.

E
EthanLG
Member
162
02-01-2020, 06:15 PM
#8
I noticed the Ryzen 5000 Series listed on the box since I was worried about needing to use BIOS flashback to update the BIOS without a CPU first.
E
EthanLG
02-01-2020, 06:15 PM #8

I noticed the Ryzen 5000 Series listed on the box since I was worried about needing to use BIOS flashback to update the BIOS without a CPU first.

H
Homwer
Junior Member
47
02-03-2020, 04:14 AM
#9
Could you confirm if the USB drive needs to be in FAT32 format for updating the BIOS?
H
Homwer
02-03-2020, 04:14 AM #9

Could you confirm if the USB drive needs to be in FAT32 format for updating the BIOS?

6
66babou
Junior Member
48
02-04-2020, 08:11 AM
#10
Using the new moving platform instead of reinstalling seems to cause performance problems.
6
66babou
02-04-2020, 08:11 AM #10

Using the new moving platform instead of reinstalling seems to cause performance problems.

Pages (2): 1 2 Next