F5F Stay Refreshed Power Users Networks Unusual network configuration – trying to grasp its functionality

Unusual network configuration – trying to grasp its functionality

Unusual network configuration – trying to grasp its functionality

Pages (2): 1 2 Next
D
dianarose32129
Senior Member
570
10-12-2024, 05:46 AM
#1
She wanted to get a game, but discovered it would take close to five hours at 4GB size! Her older brother mentioned that 5Mbit speeds weren’t standard back in 2020. We shared the same internet provider. I checked the router—it was a budget TP Link model, but there were some issues. The device wasn’t linked to the WAN port; instead, it had a single cable from the roof (connecting the wireless AP to the ISP) to a LAN port. Trying to connect the cable to the WAN port stopped the internet, though the Wi-Fi still worked. Connecting to other LAN ports functioned fine. I also accessed the router’s admin panel, which returned a “refused to connect” error when checking the default gateway. This suggested either IP/MAC restrictions or that the GUI was disabled, requiring a different tool like telnet. I used a mobile app to scan the network and saw the router listed as a Mikrotik device, hinting it might have been flashed with custom firmware. It’s strange since her brother stayed silent and seemed to be limiting bandwidth for himself, but I suspect he did. What are your thoughts? Are there steps you could try or details I missed? This configuration is unusual—not just because the internet cable isn’t on the WAN port, but also because the router claims a different brand and can’t be accessed via the admin panel.
D
dianarose32129
10-12-2024, 05:46 AM #1

She wanted to get a game, but discovered it would take close to five hours at 4GB size! Her older brother mentioned that 5Mbit speeds weren’t standard back in 2020. We shared the same internet provider. I checked the router—it was a budget TP Link model, but there were some issues. The device wasn’t linked to the WAN port; instead, it had a single cable from the roof (connecting the wireless AP to the ISP) to a LAN port. Trying to connect the cable to the WAN port stopped the internet, though the Wi-Fi still worked. Connecting to other LAN ports functioned fine. I also accessed the router’s admin panel, which returned a “refused to connect” error when checking the default gateway. This suggested either IP/MAC restrictions or that the GUI was disabled, requiring a different tool like telnet. I used a mobile app to scan the network and saw the router listed as a Mikrotik device, hinting it might have been flashed with custom firmware. It’s strange since her brother stayed silent and seemed to be limiting bandwidth for himself, but I suspect he did. What are your thoughts? Are there steps you could try or details I missed? This configuration is unusual—not just because the internet cable isn’t on the WAN port, but also because the router claims a different brand and can’t be accessed via the admin panel.

S
SnathanP
Junior Member
42
10-12-2024, 05:46 AM
#2
It appears the clear solution is obvious. The device you located isn’t functioning as a router on the network; instead, it’s serving as a wireless access point.
S
SnathanP
10-12-2024, 05:46 AM #2

It appears the clear solution is obvious. The device you located isn’t functioning as a router on the network; instead, it’s serving as a wireless access point.

N
ninja_1234
Junior Member
14
10-12-2024, 05:46 AM
#3
If a phone cable is in the wall near the router, you likely don’t need anything in the WAN port since that cable handles data transfer with your ISP. Having no web interface is typical for standard routers offered by your ISP, as it helps prevent accidental changes that could disrupt your internet connection. Mikrotik supports downloading RouterOS, which might explain why someone has adjusted the network settings. The speeds they charge for usually match what you’re seeing.
N
ninja_1234
10-12-2024, 05:46 AM #3

If a phone cable is in the wall near the router, you likely don’t need anything in the WAN port since that cable handles data transfer with your ISP. Having no web interface is typical for standard routers offered by your ISP, as it helps prevent accidental changes that could disrupt your internet connection. Mikrotik supports downloading RouterOS, which might explain why someone has adjusted the network settings. The speeds they charge for usually match what you’re seeing.

A
AvidHen275254
Junior Member
2
10-12-2024, 05:46 AM
#4
It was really challenging for me. I struggled a lot because I couldn't figure it out. Everyone else had network problems or wanted to add more APs, but I always managed it quickly—within an hour, even with the cable setup.
A
AvidHen275254
10-12-2024, 05:46 AM #4

It was really challenging for me. I struggled a lot because I couldn't figure it out. Everyone else had network problems or wanted to add more APs, but I always managed it quickly—within an hour, even with the cable setup.

C
CrazyGeorge64
Junior Member
11
10-12-2024, 05:46 AM
#5
It's an extremely old building, almost as if it hasn't seen a phone line for years. They installed a dish on the roof that links to an AP across several kilometers. That AP is tied to the router's LAN port and a PoE adapter, which supplies power directly into the roof cable—something I've verified.
C
CrazyGeorge64
10-12-2024, 05:46 AM #5

It's an extremely old building, almost as if it hasn't seen a phone line for years. They installed a dish on the roof that links to an AP across several kilometers. That AP is tied to the router's LAN port and a PoE adapter, which supplies power directly into the roof cable—something I've verified.

W
Wendysboy
Member
52
10-12-2024, 05:46 AM
#6
they connected the internet to the electric copper wires for operation, which functions but might explain the slowness. where are you located globally? since mikrotik is based in Latvia, it’s likely that if you’re elsewhere, the issue could stem from someone altering the router.
W
Wendysboy
10-12-2024, 05:46 AM #6

they connected the internet to the electric copper wires for operation, which functions but might explain the slowness. where are you located globally? since mikrotik is based in Latvia, it’s likely that if you’re elsewhere, the issue could stem from someone altering the router.

D
damore1405
Member
176
10-12-2024, 05:46 AM
#7
She doesn’t seem to be taking anything for herself. The 5Mbits connection is extremely slow. I’m having issues with our previous 12Mbits link whenever both of us used it at the same time. It just couldn’t handle it. When one of us streamed 1080p on YouTube, the whole family was cut off from using anything. Can’t they get a better plan? Switching from 12Mbits to 1Gbits only increased our monthly cost by about 30% while doubling the speed. With a new contract, they usually provide a fresh router too.
D
damore1405
10-12-2024, 05:46 AM #7

She doesn’t seem to be taking anything for herself. The 5Mbits connection is extremely slow. I’m having issues with our previous 12Mbits link whenever both of us used it at the same time. It just couldn’t handle it. When one of us streamed 1080p on YouTube, the whole family was cut off from using anything. Can’t they get a better plan? Switching from 12Mbits to 1Gbits only increased our monthly cost by about 30% while doubling the speed. With a new contract, they usually provide a fresh router too.

I
iKeFExNice
Junior Member
12
10-12-2024, 05:46 AM
#8
I
iKeFExNice
10-12-2024, 05:46 AM #8

L
LorrenK
Senior Member
703
10-12-2024, 05:46 AM
#9
They share the same ISP but I receive 50Mbit. This provider doesn’t offer clear speed tiers; performance varies by time of day—sometimes 20Mbit, other times 50. If there’s no action taken on the network, why is the router behaving like a Mikrotik device and the interface not accessible?
L
LorrenK
10-12-2024, 05:46 AM #9

They share the same ISP but I receive 50Mbit. This provider doesn’t offer clear speed tiers; performance varies by time of day—sometimes 20Mbit, other times 50. If there’s no action taken on the network, why is the router behaving like a Mikrotik device and the interface not accessible?

C
Colamile
Junior Member
43
10-12-2024, 05:46 AM
#10
You're right to question it. The device you found wasn't functioning as a router but rather as a wireless access point connected to a wired network. It was acting as a client on the LAN, generating a wireless SSID while the DHCP server was managed elsewhere.
C
Colamile
10-12-2024, 05:46 AM #10

You're right to question it. The device you found wasn't functioning as a router but rather as a wireless access point connected to a wired network. It was acting as a client on the LAN, generating a wireless SSID while the DHCP server was managed elsewhere.

Pages (2): 1 2 Next