F5F Stay Refreshed Hardware Desktop Understand the pin configuration for the bent corner CPU. Refer to the diagram for detailed connections.

Understand the pin configuration for the bent corner CPU. Refer to the diagram for detailed connections.

Understand the pin configuration for the bent corner CPU. Refer to the diagram for detailed connections.

Pages (2): 1 2 Next
1
111carys111
Posting Freak
832
10-08-2017, 05:23 AM
#1
I placed the 7700k at the corner where the alignment triangle is positioned. A pin was bent slightly. I’ve adjusted the PCB as much as possible. I’m checking the Kaby Lake pinout and still unsure how to interpret it. Should I view it from the IHS angle down or from the pin side? It seems the pinout indicates the pin isn’t being used—either gray or black. Confirm?
1
111carys111
10-08-2017, 05:23 AM #1

I placed the 7700k at the corner where the alignment triangle is positioned. A pin was bent slightly. I’ve adjusted the PCB as much as possible. I’m checking the Kaby Lake pinout and still unsure how to interpret it. Should I view it from the IHS angle down or from the pin side? It seems the pinout indicates the pin isn’t being used—either gray or black. Confirm?

P
PvtStoner
Senior Member
599
10-08-2017, 01:01 PM
#2
Noted. The corners have a lot of missing pins, and the view is from above at the CPU side, not from below where the pin pads are.
P
PvtStoner
10-08-2017, 01:01 PM #2

Noted. The corners have a lot of missing pins, and the view is from above at the CPU side, not from below where the pin pads are.

L
lukymistr
Member
68
10-30-2017, 04:57 AM
#3
Yes, on the diagram the top right corner represents the damaged side.
L
lukymistr
10-30-2017, 04:57 AM #3

Yes, on the diagram the top right corner represents the damaged side.

B
BlitzSquadHD
Member
195
10-30-2017, 07:21 PM
#4
The bottom right area is key. Pins are secured at the IHS, and you need to rotate the CPU left. Notice that the damaged corner shows fewer pins missing compared to the intact side above it. Referring to the diagram will confirm this, but flipped.
B
BlitzSquadHD
10-30-2017, 07:21 PM #4

The bottom right area is key. Pins are secured at the IHS, and you need to rotate the CPU left. Notice that the damaged corner shows fewer pins missing compared to the intact side above it. Referring to the diagram will confirm this, but flipped.

X
xRemyMC
Junior Member
24
11-06-2017, 05:12 PM
#5
That bent pin is the black square shown in the diagram. Clarification requested for better reference.
X
xRemyMC
11-06-2017, 05:12 PM #5

That bent pin is the black square shown in the diagram. Clarification requested for better reference.

D
Demonsss91
Posting Freak
767
11-11-2017, 03:18 PM
#6
I just added it to my Unraid server. It appears in the bios and seems to function there. I'll keep monitoring it, but it looks like that pin isn't being used. (fingers crossed)
D
Demonsss91
11-11-2017, 03:18 PM #6

I just added it to my Unraid server. It appears in the bios and seems to function there. I'll keep monitoring it, but it looks like that pin isn't being used. (fingers crossed)

H
HailPhoenix
Member
70
11-11-2017, 10:27 PM
#7
I might have mentioned too much already. I see the cache drive and second parity drive connected to an LSI card are gone. It gives me the feeling they're not working. Updated: an LSI PCI card wasn't being detected... I tried moving it to another PCI slot, and it appeared. (hope it works)
H
HailPhoenix
11-11-2017, 10:27 PM #7

I might have mentioned too much already. I see the cache drive and second parity drive connected to an LSI card are gone. It gives me the feeling they're not working. Updated: an LSI PCI card wasn't being detected... I tried moving it to another PCI slot, and it appeared. (hope it works)

P
POKE_PRESLEY
Member
177
11-12-2017, 03:47 PM
#8
I believe the CPU is okay and you had a very fortunate outcome. The damaged pad is the grey one, but it shouldn't really affect things because it should still connect with the pin in the socket.
P
POKE_PRESLEY
11-12-2017, 03:47 PM #8

I believe the CPU is okay and you had a very fortunate outcome. The damaged pad is the grey one, but it shouldn't really affect things because it should still connect with the pin in the socket.

C
CraMneT
Member
66
11-13-2017, 11:18 PM
#9
It seems there should be four pins diagonally in that corner, which would suggest the black square in the diagram. I'm guessing the grey squares aren't needed, but what exactly are the black squares? It looks like it's undergoing a parity rebuild and is running smoothly, matching my i5 7600k speed. I'll check if it remains stable.
C
CraMneT
11-13-2017, 11:18 PM #9

It seems there should be four pins diagonally in that corner, which would suggest the black square in the diagram. I'm guessing the grey squares aren't needed, but what exactly are the black squares? It looks like it's undergoing a parity rebuild and is running smoothly, matching my i5 7600k speed. I'll check if it remains stable.

A
Avencus
Junior Member
14
11-14-2017, 07:07 PM
#10
The highlighted part is the one that’s now missing about halfway from your CPU. (Remember, the images you shared are upside down.) If my understanding is correct, the black components aren’t needed and the grey ones likely handle power delivery. But I can’t see it clearly, so I’m uncertain.
A
Avencus
11-14-2017, 07:07 PM #10

The highlighted part is the one that’s now missing about halfway from your CPU. (Remember, the images you shared are upside down.) If my understanding is correct, the black components aren’t needed and the grey ones likely handle power delivery. But I can’t see it clearly, so I’m uncertain.

Pages (2): 1 2 Next