unbuffered ecc ram

110

11-28-2020, 05:33 PM

These should function well on mobile devices without ECC support, though the ECC component might not work. It's best to verify compatibility on systems that don't support ECC. The main concern is DDR2 RAM with 2GB, which could be cheaper and still meet a minimum of around 1000MHz due to microns.

Supernova4242

11-28-2020, 05:33 PM #1

Bombartia
Senior Member

430

11-29-2020, 07:53 PM

Support for direct RAM access is available.

Bombartia

11-29-2020, 07:53 PM #2

Support for direct RAM access is available.

seaturtle1985
Junior Member

12-20-2020, 11:42 PM

They're actually checking if it's a registered ECC or not. Most unregistered ones usually have an additional RAM chip, but no ECC chip in the center.

seaturtle1985

12-20-2020, 11:42 PM #3

They're actually checking if it's a registered ECC or not. Most unregistered ones usually have an additional RAM chip, but no ECC chip in the center.

PrinceTDW
Junior Member

12-21-2020, 03:32 AM

The "u" in PC2 5300U indicates unbuffered output. An "f" signifies buffering is active.

PrinceTDW

12-21-2020, 03:32 AM #4

The "u" in PC2 5300U indicates unbuffered output. An "f" signifies buffering is active.

Polsito
Junior Member

12-21-2020, 05:00 AM

Wait, don't go after that RAM. Upon closer inspection of the image, it's a 5300P, not U as described. The 'P' stands for parity or buffered dimms, which won't fit in your setup.

Polsito

12-21-2020, 05:00 AM #5

Wait, don't go after that RAM. Upon closer inspection of the image, it's a 5300P, not U as described. The 'P' stands for parity or buffered dimms, which won't fit in your setup.