Unable to set up router for wireless access point functionality.
Unable to set up router for wireless access point functionality.
Your main router is a Dlink DIR605L, and you're trying to use your older DIR615 as an access point. When you connect the 615 to your desktop and link it to the router's IP address, the setup wizard appears—often because the router was recently reset. Clicking on Advanced Network Settings to disable the DHCP server brings you back to the setup page. This behavior suggests a conflict between the two devices or a misconfiguration. You might want to verify the IP assignments and ensure the 615 is properly recognized as an access point.
Attempting to configure the router but receiving an "invalid password" error during login.
Hi, I need to set up two routers, DIR-615, both with the same default IP address of 192.168.0.1. First, turn off your main router (dir-615). Then perform a hard reset on the other device you want to configure as an access point. Connect it to your laptop using an RJ-45 cable. Open Internet Explorer and enter the address bar 192.168.0.1. Log in with the username admin and no password. If you follow these steps, let me know if you have any more questions. Thanks!