Unable to run four sticks of RAM.
I’m too caught up in the details to check if you can hold two stocks steady without going higher.
Currently I possess two items valued at 3600 each.
Activate DOCP, configure DRAM voltage at 1.35 and SOC voltage around 1.15, then check for boot.
Yes, it should still boot if you replace those two working sticks with the others.
Is soc the same as CPU core voltage?
no
On the SOC the other value was already configured at 1.35.
Everything stays steady as long as it remains two things.
I would apply XMP, then adjust the SOC to 1.2 volts and set the VTTDDR voltage to 0.8 volts.