Unable to power on the PC at 4.3 GHz with a voltage of 1.1250 volts

F5F Stay Refreshed Hardware Desktop Unable to power on the PC at 4.3 GHz with a voltage of 1.1250 volts

mumien350
Member

07-28-2019, 03:21 AM

Hi everyone! My setup is a Ryzen 7 3700X on a B450 Tomahawk Max, running at 4.3 GHz with 1.1250 volts. It used to boot fine, but recently the monitor went black and the mouse/keyboard stopped working. I’m now testing at normal speeds to diagnose the problem. I built the system in April 2020 and have kept it running at those speeds until now. I’ve already reset the CMOS to try starting with default settings. Any advice or steps you recommend would be super helpful! Thanks a lot!

mumien350

07-28-2019, 03:21 AM #1

TJHL
Junior Member

07-28-2019, 03:47 AM

The system went beyond its limits. Occasionally, these components stop working due to this issue. You might attempt a gradual increase and observe the outcome, hoping for a positive result.

TJHL

07-28-2019, 03:47 AM #2

The system went beyond its limits. Occasionally, these components stop working due to this issue. You might attempt a gradual increase and observe the outcome, hoping for a positive result.

Quizzer2000
Junior Member

07-28-2019, 07:11 AM

It seems Precision Boost is working well on all Auto settings. Try turning it back on and observe the results.

Quizzer2000

07-28-2019, 07:11 AM #3

It seems Precision Boost is working well on all Auto settings. Try turning it back on and observe the results.

bishopboys68
Posting Freak

899

07-29-2019, 11:41 AM

Are you sure the issue stemmed from the CPU overclock rather than the GPU or RAM? The 1.125 voltage is quite low for a Ryzen 3000. Which LLC configuration were you applying?

bishopboys68

07-29-2019, 11:41 AM #4

Are you sure the issue stemmed from the CPU overclock rather than the GPU or RAM? The 1.125 voltage is quite low for a Ryzen 3000. Which LLC configuration were you applying?