F5F Stay Refreshed Hardware Desktop Unable to locate this unexpected failure.

Unable to locate this unexpected failure.

Unable to locate this unexpected failure.

S
Sket
Junior Member
38
04-16-2023, 01:45 AM
#1
New build x670e mobo w/wifi 7800x3d with 240mm aio 7900xtx 2x 16gb cl30 1000w psu. XMP and PBO are enabled. Video freezes when audio plays. Pressing keys doesn’t update the screen. After a few minutes audio stops, then the system reboots after another 1-5 minutes. No blue screen appears. I captured a screenshot of the task manager, which froze similarly. I was able to monitor it earlier. Any suggestions?
S
Sket
04-16-2023, 01:45 AM #1

New build x670e mobo w/wifi 7800x3d with 240mm aio 7900xtx 2x 16gb cl30 1000w psu. XMP and PBO are enabled. Video freezes when audio plays. Pressing keys doesn’t update the screen. After a few minutes audio stops, then the system reboots after another 1-5 minutes. No blue screen appears. I captured a screenshot of the task manager, which froze similarly. I was able to monitor it earlier. Any suggestions?

Z
ZlouKoT
Member
88
04-16-2023, 03:35 AM
#2
If the freeze appears random and isn't related to loading, it likely points to a RAM problem—either with the RAM or how the board manages it. Test stability using a single stick installed separately. Also, avoid overclocking during diagnostics.
Z
ZlouKoT
04-16-2023, 03:35 AM #2

If the freeze appears random and isn't related to loading, it likely points to a RAM problem—either with the RAM or how the board manages it. Test stability using a single stick installed separately. Also, avoid overclocking during diagnostics.

N
NGNLxReiga
Member
186
04-18-2023, 08:30 AM
#3
Consider disabling PBO if needed. Also, keep in mind that a 6000MHz clock speed on an AM5 board isn't assured, so it might be wise to lower it for reliability.
N
NGNLxReiga
04-18-2023, 08:30 AM #3

Consider disabling PBO if needed. Also, keep in mind that a 6000MHz clock speed on an AM5 board isn't assured, so it might be wise to lower it for reliability.

X
xNoBeef
Member
133
04-19-2023, 06:38 PM
#4
The overclock must remain completely inactive during testing. This implies it should operate at the minimum speed of DDR5.
X
xNoBeef
04-19-2023, 06:38 PM #4

The overclock must remain completely inactive during testing. This implies it should operate at the minimum speed of DDR5.