Unable to connect to the @2200 bus using the Hyperx Predator 2x4gb kit.
Unable to connect to the @2200 bus using the Hyperx Predator 2x4gb kit.
Hello Community!
I just switched from Kingston HyperX Fury 1600 (2x4GB) to a Kingston HyperX Predator 2400 cl11 240 pin. I can't go beyond 1600 bus, which by default drops to 1333.
Please see my system specs below so I can help optimize and reach around 2200 MHz. My MB is limited, and XMP profiles haven’t worked for me. After booting, I got a black screen and the overclock failed error.
Thanks for your support!
http://imgur.com/vF66Em4
http://imgur.com/Z4ZsU1S
http://imgur.com/iq6hanH
http://imgur.com/34ma4Bk
http://imgur.com/hTTF3oL
Consider a slight adjustment to the CPU and observe if tit improves it.
The 3450 model seems unsuitable for handling 2400 DRAM, as I noticed one running at 1866 with adequate DRAM and MC voltage usage. For your CPU 1600, it might be the optimal option. The 3450 is designed for 1333/1600.
the imc has consistently been relocated to the cpu package, and regrettably, should your cpu not support it, your motherboard becomes irrelevant in terms of memory performance.
Start at 1600, proceed if stable, then attempt 1866, possibly followed by 2133 using manual configurations
1600 remains completely stable when choosing the 1600 profile in bios.
Try 1866 with identical timing settings, DRAM voltage set to 1.6 and CR at 2T