Unable to boot from CD on an older computer.

Pages (2): 1 2 Next

itz_Jesper2016
Member

183

02-16-2016, 03:33 AM

The image indicates the system is ready, yet it fails to start. You should investigate the boot process and check for any errors or issues.

itz_Jesper2016

02-16-2016, 03:33 AM #1

The image indicates the system is ready, yet it fails to start. You should investigate the boot process and check for any errors or issues.

LuciJoaca_FTW
Junior Member

02-21-2016, 02:29 PM

There are problems starting the installation. The HDD or SSD you're attempting to use might be faulty.

LuciJoaca_FTW

02-21-2016, 02:29 PM #2

There are problems starting the installation. The HDD or SSD you're attempting to use might be faulty.

Jazzy_Games123
Member

163

02-26-2016, 07:34 AM

The setup process takes a short time; after connecting the new HDD, it confirmed boot readiness but didn’t proceed further.

Jazzy_Games123

02-26-2016, 07:34 AM #3

The setup process takes a short time; after connecting the new HDD, it confirmed boot readiness but didn’t proceed further.

ProffesorFrog
Member

137

03-02-2016, 05:04 AM

It appears the disc is attempting to boot but failing, then switching back to your HDD which lacks a boot sector. This creates a looping issue. The problem likely stems from a damaged disc—whether original or burned. You might want to test it on another computer.

ProffesorFrog

03-02-2016, 05:04 AM #4

HUNGERGAMEMARK
Member

126

03-04-2016, 08:09 PM

The installation process starts immediately upon reading that the setup should begin. Did you correctly prepare the CD as a bootable drive if you created it yourself?

HUNGERGAMEMARK

03-04-2016, 08:09 PM #5

The installation process starts immediately upon reading that the setup should begin. Did you correctly prepare the CD as a bootable drive if you created it yourself?

iPaRaX_YT
Junior Member

03-04-2016, 09:56 PM

I ran it on another computer 10 minutes ago. The HDD inside was equipped with a system, allowing it to boot from there since it worked previously.

iPaRaX_YT

03-04-2016, 09:56 PM #6

I ran it on another computer 10 minutes ago. The HDD inside was equipped with a system, allowing it to boot from there since it worked previously.

ErtLion
Member

03-04-2016, 10:24 PM

You can consider writing the ISO to a USB drive using Rufus. Sometimes manual creation of bootable drives causes problems, especially with different tools on various Linux distributions, so trying this method might help.

ErtLion

03-04-2016, 10:24 PM #7

carloselc
Member

112

03-05-2016, 12:05 AM

Previously it functioned, but now it doesn't boot after your message.

carloselc

03-05-2016, 12:05 AM #8

Previously it functioned, but now it doesn't boot after your message.

bellibel
Junior Member

03-05-2016, 07:19 AM

I attempted to use USB, but it didn’t function properly. When I tried, it didn’t create a bootable image. Using Rufus could potentially help.

bellibel

03-05-2016, 07:19 AM #9

I attempted to use USB, but it didn’t function properly. When I tried, it didn’t create a bootable image. Using Rufus could potentially help.

Blue_Fox_Lady
Member

194

03-12-2016, 06:28 AM

#10

Usually, bootable USBs cause problems, but they’ve always functioned well with Rufus. After learning about it, I stopped using other methods. Suggest trying it.

Blue_Fox_Lady

03-12-2016, 06:28 AM #10

Usually, bootable USBs cause problems, but they’ve always functioned well with Rufus. After learning about it, I stopped using other methods. Suggest trying it.

Pages (2): 1 2 Next