TUF 3080 Display Port fails to function post-installation of drivers—BIOS appears, loads but no Windows screen displays.
TUF 3080 Display Port fails to function post-installation of drivers—BIOS appears, loads but no Windows screen displays.
Hello everyone, I'm facing some problems with my newly purchased TUF 3080 Gaming OC. The Display Port connection stops working after drivers are set up. I've run DDU clean installs and rolled back to version 472.12, enabled CSM in BIOS, but it doesn't help. Once the drivers load, the connection drops off. Even though I used the NVIDIA GPU Firmware tool and confirmed my GPU is current, the issue persists. Booting into Safe Mode shows some DP signal from the GPU, which suggests driver problems. I've changed the DP cable twice and switched the monitor's version to 1.1 after 1.2+HDR, but nothing works. My Palit 2080 Super didn't have this problem before, so it's concerning. Any suggestions or insights would be greatly appreciated. Additional details: CPU - AMD 5800X3D, Mobo - ASUS TUF X570 Gaming PLUS (Wifi), PSU - Corsair RM850i, RAM - G.Skill TridentZ 3600CL18, 32GB Monitor, PSU - Gigabyte G27Q.
First turn off CSM. Start DDU in safe mode. Once DDU is running in safe mode go to options, select prevent windows update from installing drivers. Proceed with Clean and shutdown (for installing new GPU). Power on the PC again and install the Nvidia driver using this link: https://www.nvidia.com/en-us/geforce/dri...ts/216928/. After the GPU is functioning properly, update chipset drivers: https://www.amd.com/en/support/chipsets/...t-am4/x570
CSM is back online now after I followed a suggestion in a different thread. I performed another DDU uninstall and reinstall to the version you provided (546.33), but it didn’t work. The chipset is fully updated as well, though I’m still stuck between BIOS and Windows via DP. HDMI remains functional, but Gsync isn’t working, which is a bit disappointing for this issue.