F5F Stay Refreshed Hardware Desktop Too little bandwidth?

Too little bandwidth?

Too little bandwidth?

Pages (2): 1 2 Next
I
IronStoat
Member
137
11-02-2017, 03:54 PM
#1
This is primarily an issue with slow software's opening time. I am currently using a 7900x with B650E-F motherboard, RTX 3080, and 3 m.2 SSDs. When I have the graphic card installed, my software have significant delays when opening them, like up to 15 seconds. When I remove my graphic card, the software will open instantly with no noticeable opening time. Is this a CPU PCIE limitation? Or motherboard's limitation? Per the motherboard's spec, it did not say anything about m.2 slot sharing lanes with x16 slot, for the ones connected to CPU directly. I have 2 gen4 SSDs and 1 gen3. Slot 1 have gen4, slot 2 have gen3, and last slot gen4. I have tried rotating the drives around the slots; same outcome. No matter how I arrange them, software will launcher very slowly with my graphic card installed.
I
IronStoat
11-02-2017, 03:54 PM #1

This is primarily an issue with slow software's opening time. I am currently using a 7900x with B650E-F motherboard, RTX 3080, and 3 m.2 SSDs. When I have the graphic card installed, my software have significant delays when opening them, like up to 15 seconds. When I remove my graphic card, the software will open instantly with no noticeable opening time. Is this a CPU PCIE limitation? Or motherboard's limitation? Per the motherboard's spec, it did not say anything about m.2 slot sharing lanes with x16 slot, for the ones connected to CPU directly. I have 2 gen4 SSDs and 1 gen3. Slot 1 have gen4, slot 2 have gen3, and last slot gen4. I have tried rotating the drives around the slots; same outcome. No matter how I arrange them, software will launcher very slowly with my graphic card installed.

V
VaidoLP
Junior Member
10
11-02-2017, 03:55 PM
#2
Find the current bandwidth of your PCIe slot using the BIOS settings.
V
VaidoLP
11-02-2017, 03:55 PM #2

Find the current bandwidth of your PCIe slot using the BIOS settings.

U
UberEthan
Junior Member
3
11-02-2017, 03:55 PM
#3
They operate at the correct speed setting. Gen4 is recommended for everything except the Gen3 SSD, which runs on Gen3. Bandwidth isn’t clear—could you explain what you mean by it?
U
UberEthan
11-02-2017, 03:55 PM #3

They operate at the correct speed setting. Gen4 is recommended for everything except the Gen3 SSD, which runs on Gen3. Bandwidth isn’t clear—could you explain what you mean by it?

P
PunchDownYou
Junior Member
9
11-02-2017, 03:55 PM
#4
You should look at the PCIe slot for your graphics card. To verify, enter the BIOS, navigate to general settings, then PCIE subsystem settings, and check the PCIe link speed to see the GPU's connected speed.
P
PunchDownYou
11-02-2017, 03:55 PM #4

You should look at the PCIe slot for your graphics card. To verify, enter the BIOS, navigate to general settings, then PCIE subsystem settings, and check the PCIe link speed to see the GPU's connected speed.

I
ilija
Member
206
11-02-2017, 03:55 PM
#5
This appears to be a specific software application. It may interact with other programs, so you should check for any related conflicts or dependencies. This issue doesn't seem to stem from network speed problems.
I
ilija
11-02-2017, 03:55 PM #5

This appears to be a specific software application. It may interact with other programs, so you should check for any related conflicts or dependencies. This issue doesn't seem to stem from network speed problems.

C
CalculatorD
Member
217
11-02-2017, 03:55 PM
#6
Steam runs smoothly despite some odd behavior. It made me consider network speed or PCIe lane issues. Bandwidth seems fine as long as it's at the right rates.
C
CalculatorD
11-02-2017, 03:55 PM #6

Steam runs smoothly despite some odd behavior. It made me consider network speed or PCIe lane issues. Bandwidth seems fine as long as it's at the right rates.

L
Lindinger
Member
208
11-02-2017, 03:55 PM
#7
The task manager isn't displaying anything unusual. It seems to be paused due to a driver issue, not related to disk operations.
L
Lindinger
11-02-2017, 03:55 PM #7

The task manager isn't displaying anything unusual. It seems to be paused due to a driver issue, not related to disk operations.

T
TJTheBest1
Junior Member
29
11-02-2017, 03:55 PM
#8
Confirm this point. Ensure your chipset and BIOS are current, plus network adapter drivers are installed.
T
TJTheBest1
11-02-2017, 03:55 PM #8

Confirm this point. Ensure your chipset and BIOS are current, plus network adapter drivers are installed.

C
CardStealer
Junior Member
27
11-02-2017, 03:55 PM
#9
It shouldn't be that way since the 3000 and 4000 series don't support PCIe 5, which means you're still limited to half the available bandwidth.
C
CardStealer
11-02-2017, 03:55 PM #9

It shouldn't be that way since the 3000 and 4000 series don't support PCIe 5, which means you're still limited to half the available bandwidth.

D
Domo_cookie
Member
51
11-02-2017, 03:55 PM
#10
BIOS version 1222 Shipset V5.01.03.005 everything appears normal. A 32-bit Steam background process starts when I open it. After some time, Steam’s collection of tasks will appear in the app list. If Steam is already running, it launches a second 32-bit Steam task in the background, and later combines the client service with the client webhelper into a single application.
D
Domo_cookie
11-02-2017, 03:55 PM #10

BIOS version 1222 Shipset V5.01.03.005 everything appears normal. A 32-bit Steam background process starts when I open it. After some time, Steam’s collection of tasks will appear in the app list. If Steam is already running, it launches a second 32-bit Steam task in the background, and later combines the client service with the client webhelper into a single application.

Pages (2): 1 2 Next