Timings from two different kits function properly, though it's unclear if one is superior.
Timings from two different kits function properly, though it's unclear if one is superior.
Looking for guidance on setting RAM parameters. You have four 8GB modules—two at 3600MHz and two at 3200MHz. You're considering swapping frequencies to see if overclocking is possible. Your current timings are 16-20-20-40, but you're thinking about adjusting them. Options include mixing timings (1), or sticking with the original (2), or using a different set (3) or all four (4). Let me know which approach you'd like to explore further.
Adjusting the cache size from 3600 to 3200 would shift the timing to 16-20-20-38, rounding up to whole cycles. This suggests the existing configuration is close enough, making it a safe choice. I wouldn't attempt to fine-tune the final timing if it already functions properly.
I'll try again. Seems like it's a known issue: https://forums.malwarebytes.com/topic/29...-positive/
Are you seeking this information? ------------------------------------------------------------------------------------------------- MEMORY MODULE (50) ------------------------------------------------------------- Producer : Team Group Series : Not assigned Part Code : TEAMGROUP-UD4-3600 Label for DIMM: 8GB 1Rx8 PC4-2400R-UA2-11 Tech: DDR4 SDRAM UDIMM Grade Size: 8 GB (8 parts) Setup: 1024M x64 (single level) Memory Chip Producer: N/A Chip Design: N/A Brand: N/A Model: N/A Date Made: Jan 30 - Feb 3 / Week 05, 2023 Place of Origin: Taiwan Version of Card: FF00h / A2 (8 layers) ------------------------------------------------------------- DRAM PARTS ------------------------------------------------------------- Producer : Hynix Part Code : H5AN8G8NCJR-UHC Type: Standard Monolithic 78-ball FBGA Die Size / Count: 8 Gb C-die (18 nm) / single die 1 part Composition: 1024Mb x8 (64Mb x8 x 16 rows) Clock Speed Input: 1200 MHz (0.833 ns) Timing Requirements: Minimum delays 16-16-16-39-55 Read times Supported: 18T, 17T, 16T, 15T, 14T, 13T, 12T... Voltage Supply: 1.20 V XMP Certified : 1799 MHz / 18-22-22-42-64 / 1.35 V XMP Extreme Not programmed SPD Version: 1.1 / Sept 2015 XMP Updated : 2.0 / Dec 2013 --------------------------------------------------------------------------------------------------------------------------------- MEMORY MODULE (51) ------------------------------------------------------------- Producer : Team Group Series : Not determined Part Code : TEAMGROUP-UD4-3200 Label: 8GB 1Rx8 PC4-2400R-UA2-11 Tech: DDR4 SDRAM UDIMM Grade Size: 8 GB (8 parts) Setup: 1024M x64 (single level) Memory Chip Producer: N/A Chip Design: N/A Production Date: Jan 30 - Feb 3 / Week 05, 2023 Location: Taiwan Version of Card: FF00h / A2 (8 layers) ------------------------------------------------------------- DRAM PARTS ------------------------------------------------------------- Producer : Hynix Part Code : H5AN8G8NCJR-UHC Type: Standard Monolithic 78-ball FBGA Die Size / Count: 8 Gb C-die (18 nm) / one die 1 part Composition: 1024Mb x8 (64Mb x8 x 16 rows) Clock Speed Input: 1200 MHz (0.833 ns) Timing Needs: Minimum delays 16-16-16-39-55 Read times Accepted: 18T, 17T, 16T, 15T, 14T, 13T, 12T... Voltage Supply: 1.20 V XMP Certified : 1799 MHz / 18-22-22-42-64 / 1.35 V XMP Extreme Not programmed SPD Version: 1.1 / Sept 2015 XMP Updated : 2.0 / Dec 2013 -------------------------------------------------------------------------------------------------------------------------------------------------
The 3600 sticks are Hynix CJRS. The 3200 sticks are Samsung C Die or D Die. Remove the 3600 sticks and apply 1.6V. If the system stops working completely, it indicates a faulty die. You can also run a frequency test using 3733 or 3800. Check if voltage scaling works (set C19, volt to 1.4 and 1.45v). If not, replace the die.