Timing issues in Ram overclocking

Pages (2): 1 2 Next

JabbaD4Hut
Junior Member

10-05-2019, 11:46 AM

Hello, I'm seeking advice on adjusting my Corsair Vengeance RAM for 3000MHz. Every time I switch to the profile 1 settings, my games crash. I have an AMD R7 2700X, an Asus B450, a ROG Strix Asus RTX 2060, and a 32GB Corsair Vengeance RAM. My cooling setup includes a 650W 80 Plus Bronze unit and a Noctua NH-D15. Please suggest the best approach. Thank you in advance.

JabbaD4Hut

10-05-2019, 11:46 AM #1

Titqnium
Junior Member

10-05-2019, 07:50 PM

I've encountered the same problem with my CPU and Corsair RAM too, so I'm going to check it out.

Titqnium

10-05-2019, 07:50 PM #2

I've encountered the same problem with my CPU and Corsair RAM too, so I'm going to check it out.

NoNe_1
Member

188

10-05-2019, 09:28 PM

Zen lacks a strong memory controller and performs poorly in quality control, often leading to disappointing speeds. This might mean you've missed the mark completely.

NoNe_1

10-05-2019, 09:28 PM #3

Zen lacks a strong memory controller and performs poorly in quality control, often leading to disappointing speeds. This might mean you've missed the mark completely.

_Kibbu_
Member

10-06-2019, 02:52 AM

Which slot holds the memory: 2/4 or 1/3?

_Kibbu_

10-06-2019, 02:52 AM #4

Which slot holds the memory: 2/4 or 1/3?

_Chris_MC_
Member

117

10-06-2019, 05:33 PM

all four units feature an 8x4 DDR4 3000mhz configuration

_Chris_MC_

10-06-2019, 05:33 PM #5

all four units feature an 8x4 DDR4 3000mhz configuration

_HawkyShark_
Member

10-06-2019, 06:41 PM

The official supported frequency is just under 2933mhz. You're filling all Dimm slots, which puts a strain on the memory controller. Consider adjusting DOCP to a lower manual frequency. Begin around 2666 and gradually increase up to 3000mhz. Set memory voltage between 1.350 and 1.400v, disable power down mode, and configure SOC voltage at 1.100v manually.

_HawkyShark_

10-06-2019, 06:41 PM #6

SillyDragon
Senior Member

586

10-06-2019, 08:14 PM

Thanks, I'm definitely giving it a shot and checking on its progress.

SillyDragon

10-06-2019, 08:14 PM #7

Thanks, I'm definitely giving it a shot and checking on its progress.

tuanle123
Junior Member

10-24-2019, 10:24 PM

I’ve tried setting everything automatically, but I manually adjusted the frequency to 2933 since 3000 causes crashes. I also set my DRAM voltage to 1.350000 and it’s improving performance by about 10 FPS in MHW without any crashes, though it’s still not solid yet.

tuanle123

10-24-2019, 10:24 PM #8

CadentAlphadog
Member

147

10-26-2019, 11:29 AM

I recommend reducing the latency to achieve the same performance as faster RAM. For example, a CL16 with 3200 will behave similarly to a CL15 with 3000. This should assist you.

CadentAlphadog

10-26-2019, 11:29 AM #9

I recommend reducing the latency to achieve the same performance as faster RAM. For example, a CL16 with 3200 will behave similarly to a CL15 with 3000. This should assist you.

Wgaming
Junior Member

10-27-2019, 02:28 PM

#10

Certainly. To adjust the timing, you can tweak the EQ settings or use a compressor to shape the sound. For a 3000 Hz setting, aim for a slightly compressed response around that frequency to add clarity without overpowering it.

Wgaming

10-27-2019, 02:28 PM #10

Pages (2): 1 2 Next