Threadripper 2950x NVMe raid experiencing several problems.

F5F Stay Refreshed Hardware Desktop Threadripper 2950x NVMe raid experiencing several problems.

Pages (3): Previous 1 2 3

XaVaTaR
Member

02-05-2019, 11:15 PM

#21

After removing all add-in cards, clearing the arrays, and attempting a Windows install with just a single M.2 drive on the board, the installation keeps restarting when trying to set up the RAID driver.

XaVaTaR

02-05-2019, 11:15 PM #21

PainWishes
Junior Member

02-06-2019, 01:16 AM

#22

You don't have to install RAID drivers unless you're installing Windows on a RAID setup. The rest looks fine. Avoid installing RAID drivers in that area. After Windows installation finishes, it will alter your setup—possibly inserting and installing a DIMM before you restart. If desired, you can configure RAID during BIOS setup.

PainWishes

02-06-2019, 01:16 AM #22

Emma_RU
Junior Member

02-11-2019, 07:47 PM

#23

Windows is set up, yet the raidexpert program fails to load drivers during installation.

Emma_RU

02-11-2019, 07:47 PM #23

Windows is set up, yet the raidexpert program fails to load drivers during installation.

Boxygirl2
Member

02-17-2019, 08:48 AM

#24

Start the raid first using NVMe drives inside the DIMM slots.

Boxygirl2

02-17-2019, 08:48 AM #24

Start the raid first using NVMe drives inside the DIMM slots.

Borgess_br
Junior Member

02-21-2019, 01:50 PM

#25

I accessed the dimm.2 storage areas. However, I’m still only able to view one of the four team group nvme drives in the hyper m.2 card through Device Manager.

Borgess_br

02-21-2019, 01:50 PM #25

I accessed the dimm.2 storage areas. However, I’m still only able to view one of the four team group nvme drives in the hyper m.2 card through Device Manager.

Pages (3): Previous 1 2 3